General Tab (Conduit Branch Feature Properties Dialog) - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10

Displays and defines the general properties of the selected conduit branch feature.

Standard

System

Displays the system to which the branch feature belongs. You cannot change the system of the branch feature.

Conduit Run

Specifies the conduit run to which the branch feature belongs. Other runs in the same system as the original conduit run display for selection.

Specification

Specify the active conduit specification for the branch feature. All conduit specifications that are allowed for the system parent of the conduit run display for selection. If appears in the box, the conduit specification is inherited from the conduit run to which the branch feature belongs. If the icon does not appear and you want to use the conduit specification from the run, select Use Run Specification.

Nominal Conduit Diameter

Specifies the nominal diameter (NCD) of the object. Select a value from the list, or type a value in the text box. If you type an unsupported or invalid value, the box displays a red border and the corresponding error message, listed below.

Current port configuration does not return valid Nominal Size values.

This value is no longer in the list. If you select a different value, you will not be able to return to this value.

If displays in the box, the NCD for the object is inherited from the parent object to which the object belongs. If the icon does not display, and you need to use the parent object specification from the parent object run, select Use Run NCD. If you have manually selected the part, the NCD of the selected part displays, and you cannot change it.

Type

Displays the types of branch features allowed by the selected Specification and Nominal Conduit Diameter. Branch features are listed by short codes. You can change the branch feature type if needed. If you have manually selected the part, this box displays Part selected manually and cannot be changed.

Option

Displays a list of available branch features. The software generates this list based on the conduit specification, the NCD, and the short code that you selected in the Type box. If you have manually selected the part, this box displays Part selected manually and cannot be changed.

Base Part Name

Displays the part name for the branch feature. The software selects the part number using the conduit specification guidelines. Click Select Manually to override the conduit specification, and select the part number from the catalog. If you select a part manually, the Nominal Conduit Diameter, Type and Option properties are disabled.

Fill Information

Percent Fill

Displays or defines the percent cable fill in the conduit feature.