Move a set of cableway features - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10
  1. Click Select on the vertical toolbar.

  2. In the Locate Filter, select Cableway Features.

  3. Select a feature on the cableway section to move.

  4. Right-click the feature, and select an option under Get Features.

  5. Click Move on the main ribbon.

    If you move the cableway end within ¼ inch (6.35 mm) of another cableway end, the software automatically connects the two ends.

  6. Select a move-from point.

  7. Identify the move-to point, and click the graphic view to move the cableway run to the new location.

See Moving at Boundary Connections for information about how the software performs the move operation.

Connect a Set of Cableway Features

  1. Click Select on the vertical toolbar.

  2. In the Locate Filter, select Cableway Features.

  3. Select a feature in the cableway section to modify.

  4. Right-click the feature, and select an option under Get Features.

  5. Click Move on the main ribbon.

  6. Click an end feature in the selection.

  7. Click an open end feature to connect the selection to another cableway inline. Alternatively, click a straight feature to connect the selection to another cableway at a branch point

The software lengthens or shortens the cableway length as needed to make the connection. See Connecting cable trays or cableways using Move.