The RectCWF symbol uses the following properties.
Section Name
Type the section name. The section name must be unique within the section standard.
Short Name
Type the short name for the section.
EDI Name
Type the Electronic Data Interchange name for the section. This name is used when translating sections through CIMsteel. This property is currently not used.
Group Id
Type the material group identification for the section.
Angle
Define the angle.
Setback
Define the setback. This value is defined in meters.
Flange Right Width
Define the flange width on the right side. This valve is defined in meters.
Flange Left Width
Define the flange width on the left side. This valve is defined in meters.
Unit Weight
Type the weight of the section. The unit weight is defined in mass per length pound per foot (lbm/ft).
Area
Type the cross-section area for the section.
Depth
Type the depth for the section. The depth is defined in meters
Width
Type the width for the section. The width is defined in meters.
Perimeter
The outside perimeter distance for the section.
bf
Type the width for the section.
tw
Type the web thickness for the section. The thickness is defined in meters.
tf
Type the flange thickness for the section. The thickness is defined in meters.
kdesign
Type the distance from the outer face of the flange to the web toe of the fillet of the rolled shape or the equivalent distance on the welded section.
kdetail
Type the distance from the outer face of the flange to the web toe of the fillet of the rolled shape or the equivalent distance on welded section.
CentroidX
Type the horizontal distance from the designated member edge to the centroidal axis.
CentroidY
Type the vertical distance from the designated member edge to the centroidal axis.
Ixx
Type the moment of inertia for the section's local x-axis.
Zxx
Type the plastic section modulus for the section's local x-axis.
Sxx
Type the section modulus for the section's local x-axis.
Rxx
Type the radius of gyration for the section's local x-axis.
Iyy
Type the moment of inertia for the section's local y-axis.
Zyy
Type the plastic section modulus for the section's local y-axis.
Syy
Type the section modulus for the section's local y-axis.
Ryy
Type the radius of gyration for the section's local y-axis.
J
Type the torsional moment of inertia for the section.
Cw
Type the warping constant for the section.
ro
Type the polar radius of gyration about the shear center.
H
Type the flexural constant for the section.