The S cross section symbol uses the following properties.
Section Name
Type the section name. This name appears when you label members. The section name must be unique within the section standard.
Short Name
Type the short name for the section.
EDI Name
Type the Electronic Data Interchange name for the section. This name is used when translating sections through CIMsteel. This property is currently not used.
Group Id
Type the material group identification for the section.
Unit Weight
Type the weight of the section. The unit weight is defined in mass per length pound per foot (lbm/ft).
Area
Type the cross-section area for the section.
Depth
Type the depth for the section. The depth is defined in inches.
Width
Type the flange width for the section. The width is defined in inches.
Perimeter
The outside perimeter distance for the section.
d
Type the overall depth for the section.
bf
Type the overall width for the section.
tw
Type the web thickness for the section. The thickness is defined in inches.
tf
Type the flange thickness for the section. The thickness is defined in inches.
kdesign
Type the distance from the outer face of the flange to the web toe of the fillet of the rolled shape or the equivalent distance on the welded section.
kdetail
Type the distance from the outer face of the flange to the web toe of the fillet of the rolled shape or the equivalent distance on welded section.
Fy3p
Type the maximum yield for the compact web for the section.
Ixx
Type the moment of inertia for the section's local x-axis.
Zxx
Type the plastic section modulus for the section's local x-axis.
Sxx
Type the section modulus for the section's local x-axis.
Rxx
Type the radius of gyration for the section's local x-axis.
Iyy
Type the moment of inertia for the section's local y-axis.
Zyy
Type the plastic section modulus for the section's local y-axis.
Syy
Type the section modulus for the section's local y-axis.
Ryy
Type the radius of gyration for the section's local y-axis.
J
Type the torsional moment of inertia for the section.
Cw
Type the warping constant for the section.
Wno
Type the normalized warping function. The function is defined in square inches or square millimeters.
Sw
Type the warping statical moment. The moment is defined in in4 or mm4.
Qf
Type the first moment of area for the flange.
Qw
Type the first moment of area for the web.
gf
Type the bolt gage for the flange.
gw
Type the bolt gage for the web.
IsHollow
Specify if the cross-section is hollow or not. For this cross-section, the default value is False.
IsSymmetricAlongX
Specify if the cross-section is symmetrical along the local x-axis. For this cross-section, the default value is True.
IsSymmetricAlongY
Specify if the cross-section is symmetrical along the local y-axis. For this cross-section, the default value is True.