Cross Section Symbol 2L - Intergraph Smart 3D - Reference Data - Hexagon

Intergraph Smart 3D Molded Forms Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Molded Forms
Search by Category
Reference Data
Smart 3D Version
13

The 2L cross section symbol defines double-angle sections and uses the following properties.

Section Name

Type the section name. This name appears when you label members. The section name must be unique within the section standard.

Short Name

Type the short name for the section.

EDI Name

Type the Electronic Data Interchange name for the section. This name is used when translating sections through CIMsteel. This property is currently not used.

Group Id

Type the material group identification for the section.

Unit Weight

Type the weight of the section. The unit weight is defined in mass per length, pound per foot (lbm/ft).

Area

Type the cross-sectional area for the section. The area is defined in square inches or square millimeters.

Depth

Type the depth for the section (longer legs). The depth is defined in inches or millimeters.

d

Type the depth for the section (shorter legs). The depth is defined in inches or millimeters.

bf

Type the width of a single angle. The width is defined in inches or millimeters.

Width

Type the width of the entire section. The width is defined in inches or millimeters.

Perimeter

Type the outside perimeter of the section.

tf

Type the flange thickness for the section. The thickness is defined in inches or millimeters.

tw

Type the web thickness for the section. The thickness is defined in inches or millimeters.

kdesign

Type the distance from outer face of the flange to the web toe of the fillet of the rolled shape or the equivalent distance on the welded section.

kdetail

Type the distance from outer face of the flange to the web toe of the fillet of the rolled shape or the equivalent distance on welded section.

bb

Type the back-to-back spacing on the section.

CentroidY

Type the centroid location along the y-axis. The location is defined in inches or millimeters.

Ixx

Type the moment of inertia for the section's local x-axis.

Zxx

Type the plastic section modulus for the section's local x-axis.

Sxx

Type the section modulus for the section's local x-axis.

Rxx

Type the radius of gyration for the section's local x-axis.

Ryy

Type the radius of gyration for the section's local y-axis.

ro

Type the polar radius of gyration about the shear center.

H

Type the flexural constant.

bb Configuration

Specifies which legs of the angles are placed back-to-back. Type 0 for equal leg angle. Type 1 to place the long legs back-to-back. Type 2 to place the short legs back-to-back.

lsg

Specify the bolt gage for the long side when there is one bolt row. See Member Cross Sections.

lsg1

Specify the gage distance to the first bolt row on the long side when there are two bolt rows.

lsg2

Specify the gage distance between the first and second bolt rows on the long side when there are two bolt rows.

ssg

Specify the bolt gage for the short side when there is one bolt row.

ssg1

Specify the gage distance to the first bolt row on the short side when there are two bolt rows.

ssg2

Specify the gage distance from the first bolt row to the second bolt row on the short side when there are two bolt rows.

IsHollow

Specify if the cross-section is hollow or not. For this cross-section, the default value is False.

IsSymmetricAlongX

Specify if the cross-section is symmetrical along the local x-axis. For this cross-section, the default value is False.

IsSymmetricAlongY

Specify if the cross-section is symmetrical along the local y-axis. For this cross-section, the default value is True.