Cross Section Symbol RectC - Intergraph Smart 3D - Reference Data - Hexagon

Intergraph Smart 3D Molded Forms Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Molded Forms
Search by Category
Reference Data
Smart 3D Version
13

The RectC symbol uses the following properties.

Section Name

Type the section name. The section name must be unique within the section standard.

Short Name

Type the short name for the section.

EDI Name

Type the Electronic Data Interchange name for the section. This name is used when translating sections through CIMsteel. This property is currently not used.

Group Id

Type the material group identification for the section.

Angle

Define the angle.

Setback

Define the setback. This value is defined in meters.

Unit Weight

Type the weight of the section. The unit weight is defined in mass per length pound per foot (lbm/ft).

Area

Type the cross-section area for the section.

Depth

Type the depth for the section. The depth is defined in meters

Width

Type the width for the section. The width is defined in meters.

Perimeter

The outside perimeter distance for the section.

bf

Type the width for the section.

tw

Type the web thickness for the section. The thickness is defined in meters.

tf

Type the flange thickness for the section. The thickness is defined in meters.

kdesign

Type the distance from the outer face of the flange to the web toe of the fillet of the rolled shape or the equivalent distance on the welded section.

kdetail

Type the distance from the outer face of the flange to the web toe of the fillet of the rolled shape or the equivalent distance on welded section.

CentroidX

Type the horizontal distance from the designated member edge to the centroidal axis.

CentroidY

Type the vertical distance from the designated member edge to the centroidal axis.

Ixx

Type the moment of inertia for the section's local x-axis.

Zxx

Type the plastic section modulus for the section's local x-axis.

Sxx

Type the section modulus for the section's local x-axis.

Rxx

Type the radius of gyration for the section's local x-axis.

Iyy

Type the moment of inertia for the section's local y-axis.

Zyy

Type the plastic section modulus for the section's local y-axis.

Syy

Type the section modulus for the section's local y-axis.

Ryy

Type the radius of gyration for the section's local y-axis.

J

Type the torsional moment of inertia for the section.

Cw

Type the warping constant for the section.

ro

Type the polar radius of gyration about the shear center.

H

Type the flexural constant for the section.