Use this tab to change the default movement and adjustment rates.
Amounts
Auto adjust
Turns on or off an automatic adjustment of the forward/backward motion rate. When this option is checked, the view automatically adjusts the motion rate based on the current view depth between the eye point and objects in the center of the view. The Move field is changed to read-only when select Auto adjust. If this option is not selected (unchecked), the last user-defined value can be restored. Smart Review uses the rate defined in the Move field for forward and backward motion. When a new project database file is created and the Auto Adjust option is selected, the Move field shows the default value equivalent to 10 ft or 3.048m (based on the working units) until a different value is entered.
For smoother navigation with your 3D mouse, you can turn off the Auto adjust motion rate setting (Motion Settings > Rates > Auto adjust). When you are farther away from the model, turn Auto adjust back on to quickly navigate back to a point of interest.
Move
Specifies in working units the distance to move in one step. When Auto Adjust is selected, this field is changed to read-only and shows the current motion rate.
Rotate in degrees
Specifies the rotation amount to move the view cone in one step.
Increment/Decrement adjustments
Move
Specifies in working units incremental adjustments to the motion rate.
Rotate in degrees
Specifies incremental adjustments to the motion angle.
Maximum moves per second
Specifies the maximum number of moves to perform during any keypad motion (continuous or otherwise).
Pressing the Insert key increases the movement and rotation rates using the values that you specified on the Rates Tab. Pressing the Delete key decreases the rates by the specified values. The Insert and Delete key movements are always available whether or not Auto adjust is enabled.