Cut Piece Numbering/List Type (OS 2) - Isogen - Reference

Isogen Option Switches Reference

PPMProductFamily
Procurement, Fabrication, and Construction
PPMProduct
Isogen
PPMCategory
Reference
Version_ISOGEN
13.0(2016)

In the following example, cut piece identifiers are depicted as numbers enclosed within brackets (<1>). This is the default setting of OS 2 Position 3. Also shown is an example of the "new style" Cut Piece List, which results from OS 2 Position 2 = 1.

See Also

Option Switch 2: Cut Piece Numbering/List Type