Controls the features of the skew triangle hatching facility:
-
Turn on or off hatching
-
Set the hatch link pitch
-
Set the maximum length of the hatching lines to be plotted
Switch Settings
The following settings are available for Option Switch 101:
SWITCH POSITION 1 & 2 - Hatching On/Off + Hatch Spacing
0 |
Turn off skew hatching. This is the default setting. |
1 |
Turn on skew hatching with a default hatch line pitch of 1 mm. |
Value |
Turn on skew hatching with a user-defined hatch line pitch, where Value represents the user-defined value in 1/10th mm. For example, for 2 mm hatch line pitch, enter 20. |
SWITCH POSITION 3 & 4 - Hatch Line Cut-off Length
Blank |
Set no hatch line cut-off value. This is the default setting. |
Value |
Set a hatching line cut-off value in whole mm, where Value represents a user-defined value. For example, for 25 mm cut-off value, enter 25; in this case, hatch lines exceeding 25 mm in length are not plotted, which gives a partial hatched effect. |
Switch Layout
Related Program Development Specifications |
Version |
Date |
Introduced |
1.0.0 |
APR 1983 |
Dev. No. 11 - Skewed (Offset) and Falling Pipeline Indication |
5.4.0 |
APR 1987 |
Dev. No. 53 - ISOPLOT Program Update |
6.0.0 |
MAR 1991 |
Related Option Switches |
||
Option Switch Detail Sketch |
||