The following sketches illustrate how the available settings for OS 5 impact isometric drawing output:
-
OS 5 Pos 1 = 0
-
OS 5 Pos 1 = 1
-
OS 5 Pos 2 = 0
-
OS 5 Pos 2 = 1
-
OS 5 Pos 3 = 0
The text OPEN END that is output on the OS 5 Position 3 drawing samples is on ATEXT -240.
-
OS 5 Pos 3 = 1
-
OS 5 Pos 4 = 0
-
OS 5 Pos 4 = 1
-
OS 5 Pos 5 = 0
-
OS 5 Pos 5 = 1
-
OS 5 Pos 6 = 0
-
OS 5 Pos 6 = 1
-
OS 5 Pos 7 = 0
-
OS 5 Pos 7 = 1
-
OS 5 Pos 8 = 0
The text BIP that is output on both OS 5 Position 8 drawing samples below is from the -47 record
in the Intermediate Data File (IDF).
-
OS 5 Pos 8 = 1
-
OS 5 Pos 9 = 0
-
Two sets of drawing samples are shown for this setting: one that shows jacket pipe with core components (1), and one that shows core pipe with jacket connections (2).
-
The output text CORE CONT (1) is from the -1028 record in the IDF. The output text JACKET CONT (2) is from the -1027 record in the IDF.
-