Determines how components are included or excluded from the material list through extensive options. Materials may be processed by category. Fabrications, erection, offshore, gasket, bolt, and weld groups may be controlled separately. Non-accumulation means that each occurrence of an item results in an individual entry on the material list with a quantity of 1. In the case of pipe, each individual length is listed separately. There is also an option to have nominated material categories suppressed completely.
Switch Settings
The following settings are available for Option Switch 74:
SWITCH POSITION 1 - Fabrication Materials
|
0 |
Use for all fabrication items accumulated. This is the default setting. |
|
1 |
Use for non-accumulation of all fabrication items (excluding pipe). |
|
2 |
Use for all fabrication items that are suppressed. |
|
3 |
Use for non-accumulation of fabrication items (including pipe). |
|
4 |
Use only for non-accumulation of pipe. |
SWITCH POSITION 2 - Erection Materials
|
0 |
Use for all erection items accumulated. This is the default setting. |
|
1 |
Use for non-accumulation of all erection items (excluding pipe). |
|
2 |
Use for all erection items to be suppressed. |
|
3 |
Use for non-accumulation of erection items (including pipe). |
|
4 |
Use only for non-accumulation of pipe. |
SWITCH POSITION 3 - Offshore Materials
|
0 |
Use for all offshore materials accumulated normally. This is the default setting. |
|
1 |
Use for non-accumulation of all offshore items (excluding pipe). |
|
2 |
Use for all offshore items to be suppressed. |
|
3 |
Use for non-accumulation of offshore items (including pipe). |
|
4 |
Use only for non-accumulation of pipe. |
SWITCH POSITION 4 - Gaskets
|
0 |
Use for all gaskets accumulated normally. This is the default setting. |
|
1 |
Use for non-accumulation of gaskets. |
|
2 |
Use for all gaskets to be suppressed. |
SWITCH POSITION 5 - Bolts
|
0 |
Use for all bolts accumulated normally. This is the default setting. |
|
1 |
Use for non-accumulation of bolts. |
|
2 |
Use to suppress all bolts. |
SWITCH POSITION 6 - Welds
|
0 |
Use for all welds accumulated normally. This is the default setting. |
|
1 |
Use for non-accumulation of welds. |
|
2 |
Use to suppress all welds. |
SWITCH POSITION 7 - Accumulation of Fixed Pipe Materials for Output to Material List or Material Control Files
|
0 |
Accumulate fixed pipe material by quantity. |
|
1 |
Accumulate fixed pipe material by length. |
SWITCH POSITION 8 - IDFGEN Output of Components with No Item Code
|
0 |
Set components with no item code to Not On Material List. This is the default setting. |
|
1 |
Suppress setting of components with no item code to Not On Material List. |
Switch Layout
|
Related Program Development Specifications |
Version |
Date |
|
Introduced |
1.0.0 |
APR 1983 |
|
Dev. No. 56 - User Defined Material List |
7.4.0 |
DEC 1994 |
|
8.11.0 Release Notes |
8.11.0 |
FEB 2004 |
|
10.0.0 Release Notes |
10.0.0 |
APR 2009 |
|
Related Option Switches |
||
|
N/A |
||
|
Option Switch Detail Sketch |
||