Identifies the method used when splitting two pipelines into multiple isometric drawings. Two methods are available:
-
Automatic: This method automatically calculates the number of pipeline graphics that can be displayed on the selected drawing size, and then generates the exact number of isometric drawings that are required to contain the completed pipeline.
-
Fixed: This method requires that you specify the number of isometric drawings that are necessary to display the completed pipeline.
-
The setting in Position 1 is ignored if manual pipeline split points are present in the piping data file (PDF).
-
Since any option switch setting applies to all the pipelines in a run, it is recommended that you only use the fixed method in special cases for single pipeline runs.
-
An added option permits any drawing split points input in the 3D model by the user and present in the PDF to be ignored.
Switch Settings
The following settings are available for Option Switch 7:
SWITCH POSITIONS 1 and 2 - Various Controls
0 |
Use automatic splitting to control the number of isometric drawings that are required. |
Value |
Set the number of isometric drawings that are required. |
SWITCH POSITION 3 - Ignore Drawing Split Points
1 |
Ignore user-defined drawing split points present in the PDF. |
Switch Layout
Related Program Development Specifications |
Version |
Date |
Introduced |
1.0 |
APR 1983 |
7.7 |
AUG 1986 |
|
Related Option Switches |
||
Option Switch Detail Sketch |
||