Identifies flanged and other end connection assemblies on the isometric drawing using different enclosure types.
This option switch permits a table of assembly information to be positioned on the drawing frame on either a per-drawing or per-pipeline basis.
Switch Settings
The following settings are available for Option Switch 79:
SWITCH POSITION 1 - Output of Assembly Identification
0 |
Output no assembly identification. |
1 |
Output a numerical assembly identification. |
2 |
Output an alphabetical assembly identification. |
SWITCH POSITION 2 - Assembly Identification Per Drawing or Per Pipeline
0 |
Output an assembly identification per drawing. |
1 |
Output an assembly identification per pipeline. |
SWITCH POSITION 3 - Enclosure Type for Erection Assembly Connections
0 |
Use no enclosure. |
1 |
Use no enclosure. |
2 |
Use a diamond-ended box enclosure. |
3 |
Use a round-ended box enclosure. |
4 |
Use a triangular enclosure. |
5 |
Use a diamond enclosure. |
6 |
Use a square-ended box enclosure. |
7 |
Use a circular enclosure. |
8 |
Use a double-circle assembly enclosure. |
9 |
Use an elliptical assembly enclosure. |
SWITCH POSITION 4 - Output of Assembly Table
0 |
Output no assembly table on drawing. |
1 |
Output an assembly table on drawing. |
SWITCH POSITION 5 - Enclosure Type for Fabrication Assembly Connections
0 |
Use no enclosure. |
1 |
Use no enclosure. |
2 |
Use a diamond-ended box enclosure. |
3 |
Use a round-ended box enclosure. |
4 |
Use a triangular enclosure. |
5 |
Use a diamond enclosure. |
6 |
Use a square-ended box enclosure. |
8 |
Use a circular enclosure. |
9 |
Use a double-circle assembly enclosure. |
10 |
Use an elliptical assembly enclosure. |
SWITCH POSITION 6 - Enclosure Type for Offshore Assembly Connections
0 |
Use no enclosure. |
1 |
Use a diamond-ended box enclosure. |
2 |
Use a round-ended box enclosure. |
3 |
Use a triangular enclosure. |
4 |
Use a diamond enclosure. |
5 |
Use a square-ended box enclosure. |
6 |
Use a circular enclosure. |
8 |
Use a double-circle assembly enclosure. |
9 |
Use an elliptical assembly enclosure. |
SWITCH POSITION 7 - Assembly Identification Sequence
0 |
Sequential Assembly Identification independent of category. |
1 |
Sequential Assembly Identification for each category. |
SWITCH POSITION 8 - Assembly Identification Assignment
0 |
Use all categories. |
1 |
Use fabrication only. |
2 |
Use erection only. |
3 |
Use offshore only. |
4 |
Use erection and offshore only. |
SWITCH POSITION 9 - Circular or Elliptical Weld Number Enclosures
0 |
Use a weld number circular or elliptical enclosure fixed to two characters. |
1 to 8 |
Use a weld number circular or elliptical enclosure fixed to a value set. |
9 |
Use a weld number circular or elliptical enclosure fixed to variable sizes. |
Switch Layout
Related Program Development Specifications |
Version |
Date |
Introduced |
1.0.0 |
APR 1983 |
Dev. No. 85 - Site Assembly Identification |
8.4.0 |
JUL 2000 |
Dev. No. 89H - Message Enclosures |
8.10.0 |
MAY 2002 |
Dev. No. 91B - End Connection Identification |
10.0.0 |
APR 2010 |
Related Option Switches |
||
N/A |
||
Option Switch Detail Sketch |
||
N/A |