Controls the use of overall dimensions:
-
Set whether overall dimensions are to be plotted, and if they are which type is plotted.
-
Set the dimension line stand-out distance.
Overall dimensions to valve centers are available only to valves that have a spindle.
Switch Settings
The following settings are available for Option Switch 118:
SWITCH POSITION 1 - Overall Dimensions On/Off and Type
|
0 |
Set no overall dimensions. This is the default setting. |
|
1 |
Turn on overall dimensions--going across branches, such as tees, olets, and crosses. |
|
2 |
Turn on overall dimensions--stopping at branches, such as tees, olets, and crosses. |
|
3 |
Turn on overall dimensions--going to valve centers and going across branches, such as tees, olets, and crosses. |
|
4 |
Turn on overall dimensions--going to valve centers but stopping at branches, such as tees, olets, and crosses. |
SWITCH POSITION 2 & 3 - Overall Dimension Standout
|
0 |
Set no overall dimension standout. This is the default setting. The software is used for all overall dimensions. |
|
Value |
Set the overall dimension standout distance, where Value represents the user-defined overall dimension standout distance in whole mm. For example, for 22 mm, set 22. |
SWITCH POSITION 4 - Overall Dimension Output
|
0 |
Output overall dimensions across component categories. |
|
1 |
Output overall dimensions across fabrication components only. |
Switch Layout
|
Related Program Development Specifications |
Version |
Date |
|
Introduced |
1.0.0 |
APR 1983 |
|
Dev. No. 36 - Overall Dimensions to Center-line of Valves |
5.9.0 |
Mar 1990 |
|
Dev. No. 53 - Isoplot Program Update |
7.0.0 |
OCT 1993 |
|
Related Option Switches |
||
|
N/A |
||
|
Option Switch Detail Sketch |
||