Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsFrameOffset1:: Offset1Value |
Specifies the distance that the member should be offset from the pipe. To select the offset value using Offset1Rule, do not type any value for this property. Defines an HgrSupportRule that returns the offset from the member to the pipe. To select the offset value using Offset1Value, do not type any value for this property By Rule - 1 – Offset1Rule is used By Input - 2 – Offset1Value is used. Specifies how Offset1 should be measured. If you type an unsupported value or do not assign a value, then the software uses the default value that is 1 |
Use the following definitions: 1 - Inside Steel to Edge of Pipe 2 - Center Steel to Edge of Pipe 3 - Outside Steel to Edge of Pipe 4 - End of Steel to Edge of Pipe |
IJUAhsFrameOffset1Rl:: Offset1Rule |
||
IJUAhsFrameOffset1Sel:: Offset1Selection |
||
IJUAhsFrameOffset1Def:: Offset1Definition |
||
IJUAhsFrameOffset2:: Offset2Value |
Specifies the value of the distance that the second leg should be offset from the pipe. Defines an HgrSupportRule that returns the offset from the second leg to the pipe. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. Specifies how the Offset2 should be measured. If you type an unsupported value, or do not assign a value, then the software uses the default value that is 1. For U, T, and Box Frame types, Offset2Definition is same as Offset1Definition. |
The following values are allowed: By Rule - 1 – Offset2Rule is used By Input - 2 – Offset2Value is used |
IJUAhsFrameOffset2Rl:: Offset2Rule |
||
IJUAhsFrameOffset2Def:: Offset2Definition |
||
IJUAhsFrameOffset2Sel:: Offset2Selection |
||
IJUAhsFrameShoeHeight:: ShoeHeightValue |
Specifies the distance that the main steel member should be offset from the pipe. To determine the shoe height using ShoeHeightRule, do not type any value for this property. |
1.Specify the Height value number. Alternatively, specify the part class. 2.Use a HgrRule to obtain the part.Specify the part number. Alternatively, specify the part class The pipe attachment 1 is an optional part. Leave these attributes blank if you do not want to include a pipe attachment. |
IJUAhsFrameShoeHeightRl:: ShoeHeightRule |
Defines an HgrSupportRule that returns the shoe height. To determine the shoe height using ShoeHeightValue, do not type any value for this property. |
|
IJUAhsFrameShoeHeightDef:: ShoeHeightDefinition |
Specifies how ShoeHeight should be measured. If you type an unsupported value or do not assign any value, then the software uses the default value that is 1. |
|
JUAhsFrameShoeHeightSel:: ShoeHeightSelection |
Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select ShoeHeightValue by either input or rule. |
By Rule - 1 – Offset1Rule is used By Input - 2 – Offset1Value is used |