The following attributes are used to configure the support.
Name |
User Name |
Category |
On Property Page |
Read Only |
---|---|---|---|---|
SteelOrientation |
Steel Orientation |
Standard |
Yes |
No |
SteelCardinalPoint |
Steel Cardinal Point |
Standard |
Yes |
No |
CPOffsetX |
Cardinal Point Offset X |
Standard |
Yes |
No |
CPOffsetY |
Cardinal Point Offset Y |
Standard |
Yes |
No |
SteelAngle |
Steel Angle |
Standard |
Yes |
No |
ReflectSteel |
Reflect Steel |
Standard |
Yes |
No |
LugLength |
Lug Length |
Dimensions |
Yes |
No |
LugLengthRule |
Lug Length Rule |
Standard |
No |
Yes |
LugLengthSelection |
Lug Length Selection |
Standard |
No |
Yes |
LugOffsetX |
Lug - Offset X |
Dimensions |
Yes |
No |
LugOffsetXRule |
Lug - Offset X Rule |
Standard |
No |
Yes |
LugOffsetXSelection |
Lug - Offset X Selection |
Standard |
No |
Yes |
LugOffsetY |
Lug - Offset Y |
Dimensions |
Yes |
No |
LugOffsetYRule |
Lug - Offset Y Rule |
Standard |
No |
Yes |
LugOffsetYSelection |
Lug - Offset Y Selection |
Standard |
No |
Yes |
LugOffsetZ |
Lug - Offset Z |
Dimensions |
Yes |
No |
LugOffsetZRule |
Lug - Offset Z Rule |
Standard |
No |
Yes |
LugOffsetZSelection |
Lug - Offset Z Selection |
Standard |
No |
Yes |
PipeAtt1Angle |
Pipe Attachment 1 - Orientation Angle |
Dimensions |
Yes |
No |
PipeAtt1AngleRl |
Pipe Attachment 1 - Orientation Angle Rule |
Standard |
No |
Yes |
OffsetAlPipe |
Offset Along Pipe |
Dimensions |
Yes |
No |
OffsetAlPipeRl |
Offset Along Pipe Rule |
Standard |
No |
Yes |
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsSteelOrient:: |
Specifies the orientation of the hanger steel. Accepted values are located in the hsSteelOrientation codelist table in the HS_S3DAssy_Codelist.xls workbook. |
1 - Horizontal 2 - Vertical |
IJUAhsSteelCP:: |
Specifies the relative position of the hanger steel section. Fifteen cardinal positions are available. |
Available cardinal points: The following example shows hanger steel parts placed with the angle section cardinal point = 1. |
IJUAhsSteelCPX:: |
Specifies a numerical value for the distance that the cardinal point should be offset along the X-Axis of the cross section. |
Example (cardinal point = 1) |
IJUAhsSteelCPY:: |
Specifies a numerical value for the distance that the cardinal point should be offset along the Y-Axis of the cross section. |
Example (cardinal point = 1) |
IJUAhsSteelAngle:: |
Specifies the angle by which the steel cross-section is rotated about the specified cardinal point. |
Example (cardinal point = 1, horizontal) Example (cardinal point = 1, vertical) |
IJUAhsReflectSteel:: |
Specifies whether the rich hanger beam cross section should be reflected about its Y-Axis. |
False True |
IJUAhsLugLength::LugLength |
Specifies the length of the steel for the shear lug. |
|
IJUAhsLugOffsetX::LugOffsetX |
Specifies the offset for the lug along the x-axis, y-axis, and z-axis. The x direction is along the pipe. The y direction is lateral to the pipe. The z direction is towards the supporting structure. |