Gusset Attributes - Intergraph Smart Reference Data Standard Database - Version 12.4 - Help - Hexagon

IJUAhsGussetQuant::

GussetQuantity

Specifies the number of Gusset plates required.

IJOAhsGussetAngle::GussetAngle

Specifies the rotation of the Gusset part. This is the rotation of all the gussets about the dummy pipe.

The angle between gussets depends on the ‘GussetQuantity’.

Angle between two Gussets=360/GussetQuantity

For Example,

if GussetQuantity=2 then Angle between gussets=360/2=180

if GussetQuantity=4 then Angle between gussets=360/4=90

For Example, If GussetAngle = 0,

If GussetAngle = 45,

IJUAhsRepadWeld::

RepadWeldPart

The Weld Part-Number or Part Class to use for the support.

If you intend to select the Part-Number using the RepadWeldRule, then this attribute should be left blank.

Option 1 – Specify a Part-Number or Part Class directly

WeldPart

"S3Dhs_WeldPoint-2"

WeldRule

" "

Option 2 – Use a HgrRule to get the Part

WeldPart

" "

WeldRule

"WeldByPipeSize"

The repad weld will only be included if there is a repad in the support.

The cap weld will only be included if there is a cap plate in the support.

IJUAhsRepadWeldRl::

RepadWeldRule

An HgrSupportRule that returns a Weld Part-Number. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID.

If you intend to specify a Part-Number directly using RepadWeldPart, then this attribute should be left blank.

IJUAhsDummyWeld1::

DummyWeld1Part

The Weld Part-Number or Part Class to use for the support.

If you intend to select the Part-Number using the DummyWeld1Rule, then this attribute should be left blank.

IJUAhsDummyWeld1Rl::

DummyWeld1Rule

An HgrSupportRule that returns a Weld Part-Number. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID.

If you intend to specify a Part-Number directly using DummyWeld1Part, then this attribute should be left blank.

IJUAhsDummyWeld2::

DummyWeld2Part

The Weld Part-Number or Part Class to use for the support.

If you intend to select the Part-Number using the DummyWeld2Rule, then this attribute should be left blank.

IJUAhsDummyWeld2Rl::

DummyWeld2Rule

An HgrSupportRule that returns a Weld Part-Number. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID.

If you intend to specify a Part-Number directly using DummyWeld2Part, then this attribute should be left blank.

IJUAhsBPlateWeld::

BasePlateWeldPart

The Weld Part-Number or Part Class to use for the support.

If you intend to select the Part-Number using the BasePlateWeldPartRule, then this attribute should be left blank.

IJUAhsBPlateWeldRl::

BasePlateWeldRule

An HgrSupportRule that returns a Weld Part-Number. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID.

If you intend to specify a Part-Number directly using BasePlateWeldPart, then this attribute should be left blank.