The following attributes specify the other dimensions a Shoe support:
Name |
User Name |
OA |
Category |
On Property Page |
Read Only |
---|---|---|---|---|---|
Length2 |
Length 2 - Value |
Yes |
Dimensions |
Yes |
No |
Length2Rule |
Length 2 - Rule |
No |
Dimensions |
Yes |
Yes |
Length2Selection |
Length 2 - Selection |
No |
Dimensions |
Yes |
Yes |
Length2Definition |
Length 2 - Definition |
No |
Dimensions |
Yes |
Yes |
Length3 |
Length 3 - Value |
Yes |
Dimensions |
Yes |
No |
Length3Rule |
Length 3 - Rule |
No |
Dimensions |
Yes |
Yes |
Length3Selection |
Length 3 - Selection |
No |
Dimensions |
Yes |
Yes |
Length3Definition |
Length 3 - Definition |
No |
Dimensions |
Yes |
Yes |
Height2 |
Height 2 - Value |
Yes |
Dimensions |
Yes |
No |
Height2Rule |
Height 2 - Rule |
No |
Dimensions |
Yes |
Yes |
Height2Selection |
Height 2 - Selection |
No |
Dimensions |
Yes |
Yes |
Height2Definition |
Height 2 - Definition |
No |
Dimensions |
Yes |
Yes |
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhs_Length2::Length2 |
Specifies the length of Repad, Clamp, Shield, or Shield2. |
Use the following definitions: 1 = Length of Repad 2 = Length of Repad - (Shoe Length + 2 * Length2) 3 = Width of Clamp 4 = Width of Clamp - (Shoe Length + 2 * Length2) 5 = Length of Shield 6 = Length of Shield - (Shoe Length + 2 * Length2) 7 = Length of Shield2 8 = Length of Shield2 - (Shoe Length + 2 * Length2) 9 = Length of both, Shield and Shield2 10 = Length of both Shield and Shield2 - (Shoe Length + 2 * Length2) |
IJUAhs_Length3::Length3 |
Specifies the length of insulation. Length3Definition determines how this attribute is measured. |
Use the following definitions: 1 = Insulation Length 2 = Insulation Length - (Shoe Length + 2 * Length3) 3 = Insulation Length - (Width of Clamp + 2 * Length3) 4 = Insulation Length - (Shield Length + 2 * Length3) 5 = Insulation Length - (Shield2 Length + 2 * Length3) |
IJUAhs_Height2::Height2 |
Specifies the height of End Plates, Gusset Plates, Clamp, or Rib Plates. Height2Definition determines the type of plate. |
Use the following definitions: 1 - Height End Plates 2 - Height Gusset Plates 3 - Height of Rib Plates |