Use the following attributes to define the combined trunnion data driven assembly used to form the Combined Trunnion support. For more information on how to use the attributes, see Part Specifications.
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsTrunnionSupport:: |
Specifies the part number of a Trunnion support. |
Trunnion support is mandatory. Use either GuideSupport or GuideSupportRule attribute to specify the assembly. |
IJUAhsShoeSup:: |
Specifies the part number of a Shoe support. |
Shoe support is optional. If you do not require a shoe, do not specify any values for either the ShoeSupport or ShoeSupportRule. |
IJUAhsUBoltSuppport:: |
Specifies the part number of a U-Bolt support. Configure the U-Bolt as a Shoe U-Bolt. |
U-Bolt support is optional. If you do not require an U-Bolt, do not specify any values for either the UboltSupport or UboltSupportRule. |
IJUAhsInsulationSupport:: |
Specifies the part number of an Insulation support. |
Insulation support is optional. If you do not require an insulation, do not specify any values for either the InsulationSupport or InsulationSupportRule. |
IJUAhsGuideSup:: |
Specifies the part number of a Guide support. |
Guide support is optional. If you do not require a guide, do not specify any values for either the GuideSupport or GuideSupportRule. |
IJUAhsStopSup:: |
Specifies the part number of a Stop support. |
Stop support is optional. If you do not require a stop, do not specify any values for either the StopSupport or StopSupportRule. |
IJUAhsMember1:: IJUAhsMember1Rl:: |
Specifies the part number of a rich hanger beam steel section that is to be placed under the first trunnion leg. |
|
IJUAhsMember1Ang:: |
Specifies the angle of rotation for the first steel section about its length. |
The following codelist values are supported: 0, 90, 180, and 270. |
IJUAhsMember2:: IJUAhsMember2Rl:: |
Specifies the part number of a rich hanger beam steel section to be placed under the second trunnion leg. |
|
IJUAhsMember2Ang:: |
Specifies the angle of rotation for the second steel section about its length. |
The following codelist values are supported: 0, 90, 180, and 270. |
IJUAhsSteelLen:: |
Specifies the length of the steel section part. |
If you use two steel sections, they are set to the same length. |