IJOAhsPipeOD::PipeOD
Specifies the outside diameter of the pipe.
IJOAhsElbow::ElbowRadius
Specifies the bend radius of the elbow pipe component. This setting is used by ElbowRPad.
IJOAhsElbow::FaceToCenter
Specifies the distance between the face of the elbow and the center. For a short tangent elbow, the face to center distance is the same as the elbow radius.
IJOAhsBendAngle::BendAngle
Specifies the elbow angle.
IJUAhsSize::Size
Specifies the repad part size. The part selection rules use this setting to select the correct repad part.