These properties define the geometry of the block clamp.
For these properties, the default unit of distance is "mm". Specify "in" at the end of the dimensional value to use inches (for example 10in).
IJUAhsSize::Size
Specifies a string attribute that selects the correct block clamp. This needs to be reported for BOMs.
IJOAhsDiameter1::Diameter1
Specifies the diameter of the first pipe of the block clamp.
IJOAhsDiameter2::Diameter2
Specifies the diameter of the second pipe of the block clamp, if there is one.
IJUAhsHeight3::Height3
Specifies the distance from the bottom of the block clamp to the pipe centerline of the second pipe, if there is one.
IJUAhsRodTakeOut::RodTakeOut
Specifies the distance from the pipe centerline to the rod connection point.