Attachment Orientation Properties - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Reference Data
Smart 3D Version
13.1

IJUAhsBeamTopAtt1Orient::TopAtt1Orient

Specifies the orientation of the top attachment1 with respect to the beam. The default codelist value is Aligned. This property uses the following hsOrientation codelist values:

1 = Perpendicular
2 = Aligned

IJUAhsBeamMidAtt1Orient::MidAtt1Orient

Specifies the orientation of the top attachment2 with respect to the beam. The default codelist value is Aligned. This property uses the following hsOrientation codelist values:

1 = Perpendicular
2 = Aligned

IJUAhsBeamBotAtt1Orient::BotAtt1Orient

Specifies the orientation of the bottom attachment1 with respect to the beam. The default codelist value is Aligned. This property uses the following hsOrientation codelist values:

1 = Perpendicular
2 = Aligned

IJUAhsBeamTopAtt2Orient::TopAtt2Orient

Specifies the orientation of the bottom attachment2 with respect to the beam. The default codelist value is Aligned. This property uses the following hsOrientation codelist values:

1 = Perpendicular
2 = Aligned

IJUAhsBeamMidAtt2Orient::MidAtt2Orient

Specifies the orientation of the middle attachment1 with respect to the beam. The default codelist value is Aligned. This property uses the following hsOrientation codelist values:

1 = Perpendicular
2 = Aligned

IJUAhsBeamBotAtt2Orient::BotAtt2Orient

Specifies the orientation of the middle attachment2 with respect to the beam. The default codelist value is Aligned. This property uses the following hsOrientation codelist values:

1 = Perpendicular
2 = Aligned