Specifies the static or dynamic load case to be included in the combination case. Select a load case from the list. Static load cases start with S, and dynamic load cases are start with D. Each is then followed by a load case number of a static or shock analysis defined on the Load Cases tab. For more information, see Spectrum/Time History Load Cases Tab.
The following examples are valid values: S1, STATIC1, S3, STATIC3, D1, DYNAMICS1, S#1, and D#1. Use any length up to 24 characters. For static load case definitions, the static case must exist and have already been run (also, the S can’t refer to a spring hanger design case). For dynamic load case definitions, the dynamic load case number refers to the shock load case.