You can use different Isometric Drawing Generation dialog box, you can select a style or create a new style. Selecting the default style to create a drawing applies a predefined set of styles and rules to the drawing. Use this option if you are not familiar with the drawing styles or if you do not want to create a custom drawing style.
to create a drawing. Using theTo create a drawing using the default style:
-
Select File > Open to open a model.
-
On the Home tab, click Generate Stress Isometrics to open the model in the C2Isogen module.
-
Select Create Isometric Drawing in the Isometric Tools toolbar to open the Isometric Drawing Generation dialog box.
-
Select Use Default Style, and then click OK to create drawings.
The Drawings dialog box displays a list of drawings created for the piping model and reports errors generated during drawing creation.
-
Select the drawings to view, and then click View to open the drawings in your default viewer.
-
Select Generate PDF Files to create a .pdf file of the drawings in addition to the .dwg file.
-
The software saves .dwg drawing files and .pdf files in the same folder as the piping model.
-
By default, the software uses the pipe model unit system in the drawing.
-
You cannot make any changes to the default drawing style.