C2Isogen menu: StressIso > Line Number Filtering
C2Isogen Isometric Tools toolbar: Line Number Filter
Filters isometric drawing creation by line numbers.
To use Line Number Filtering , you must first define two or more line numbers with the Line Number option on the Classic Piping Input Dialog.
For a model containing two line numbers:
-
On the CAESAR II Home Tab, select Generate Stress Isometrics to open the model in the C2Isogen module.
-
Select StressIso > Line Number Filtering .
-
Select Use Line Number Filtering for Isometric Generation, and then select Line Number 2.
-
Select OK and then create the drawing:
Create a drawing using the default style
Create a drawing using an existing style
Create a drawing using a new style
The isometric drawing filters out line number 1 and displays line number 2.