Where applicable, each AText description includes its respective default value. If a default value is not specified, the AText is normally left blank.
For each AText, three options are available:
-
<Default> uses the default AText value.
-
<Suppress> suppresses the AText value.
-
<Edit value> modifies the AText value with the user-specified entry.
Fall Label
Denotes a FALLing (sloped) line. Used in conjunction with the Fall symbol. You can use the ? symbol to determine the format used for outputting the falling line messages. The default value is FALL ?.
AText ID: |
-222 |
? Value: |
Slope angle |
$ Supported: |
Yes |
Fall Label (Ratio)
Denotes falling lines specified with a ratio, such as 1:10.
AText ID: |
-224 |
? Value: |
None |
$ Supported: |
No |
Fall Label (Percent)
Produces a system-generated percent symbol ( % ) used on falling pipelines specified with a percentage indication.
AText ID: |
-225 |
? Value: |
None |
$ Supported: |
No |
Fall Label (Gradient)
Indicates a falling line specified in gradients. The default value is GRAD.
AText ID: |
-226 |
? Value: |
None |
$ Supported: |
No |
Fall Label (Metric Incline)
Indicates a falling line specified as an incline in metric units, such as millimeters per meter. The default value is PER M.
AText ID: |
-227 |
Value: |
None |
$ Supported: |
No |
Fall Label (Imperial Incline)
Indicates a falling line specified as an incline in imperial units, such as inches per foot. The default value is PER FT.
AText ID: |
-228 |
? Value: |
None |
$ Supported: |
No |
Skewed Branch Label
Identifies skewed branches in cases where skew box indication has been suppressed. A software-generated direction is appended to this text to form a complete message. The default value is ORIENTATION DIRECTION.
AText ID: |
-287 |
? Value: |
None |
$ Supported: |
No |
Horizontal Label
Distinguishes horizontal skew angles from vertical skew angles on the isometric drawing.
AText ID: |
-548 |
? Value: |
Skew angle |
$ Supported: |
Yes |
Vertical Skew Label
Distinguishes vertical skew angles from horizontal skew angles on the isometric drawing.
AText ID: |
-549 |
? Value: |
Skew angle |
$ Supported: |
Yes |