Unique Part Number
Controls whether unique part numbers are used. Also defines the type of suffix used for unique part numbers.
-
Alpha - Use an alphabetic suffix.
-
Numeric - Use a numeric suffix.
-
Off - Turn off all unique part number facilities.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.UniquePartNumber
Part Number Suffix
Controls sequencing of the identifier suffix used for part numbering on the isometric drawing.
-
Continuous generates unique part number suffixes as a continuous sequence across all output drawings. For example, 6.1 to 6.6 on Drg 1 of 2 and 6.7 to 6.11 on Drg 2 of 2.
-
Per Drawing generates part number suffixes with a new sequence for each drawing. For example, 6.1 to 6.6 on Drg 1 of 2 and 6.1 to 6.5 on Drg 2 of 2.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.IdentifierSuffix
Show
Controls whether the unique part numbers table is plotted. To plot the table, select the checkbox.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.PlotUniquePtNoTable
Continuous Down
Controls the direction of the unique part numbers table. Select the checkbox to set the table direction so that it is down. To set the table direction so it is down, clear the checkbox.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.ContinuousDown
Start X
Defines the starting X position of the list in millimeters or inches.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.StartX
Start Y
Defines the starting Y position of the list in millimeters or inches.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.StartY
Vertical Spacing
Sets the vertical spacing between each horizontal line in millimeters or inches.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.VerticalSpacing
Text Height
Sets the text height to be used. Type a value (real number) in millimeters or inches.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.TextHeight
Maximum Entries
Controls the maximum number of entries before an overflow drawing is created if you have selected the Overflow checkbox.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.MaxEntries
Overflow
Controls whether an overflow drawing is created when the Maximum Entries setting is exceeded. Select the checkbox to create an overflow drawing.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.TableOverflow
Layer
Sets the drawing layer for the unique part number table. Type the required value in the range 1-50.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.DrawingLayer
Unique Bolt Numbers
Controls the output of unique part numbers on bolts.
-
Yes outputs unique part numbers on bolts.
-
No suppresses the output.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.UniqueNosBolts
Unique Gasket Numbers
Controls output of unique part numbers on gaskets.
-
Yes outputs unique part numbers on gaskets.
-
No suppresses the output.
Defines:
Option Switch - N/A
I-Configure - Supplementary.Traceability.UniqueNosGaskets