Where applicable, each AText description includes its respective default value. If a default value is not specified, the AText is normally left blank.
For each AText, three options are available:
-
<Default> uses the default AText value.
-
<Suppress> suppresses the AText value.
-
<Edit value> modifies the AText value with the user-specified entry.
Pulled Bend Remark
Denotes a pulled bend remark, which is listed under AText -324 (REMARKS HEADING) if a cut pipe length contains a pulled bend. The default value is PLD BEND.
AText ID: |
-326 |
? Value: |
None |
$ Supported: |
No |
Loose Flange Remark
Denotes a remark which is listed under AText -324 (REMARKS HEADING) if a cut pipe length has a loose flange requirement. The default value is LOOSE FLG.
AText ID: |
-327 |
? Value: |
None |
$ Supported: |
No |
Field Fit Remark
Denotes the field fit weld remark that is listed under AText -324 (REMARKS HEADING) if a cut pipe length contains a field fit weld. The default value is FFWELD.
AText ID: |
-328 |
? Value: |
None |
$ Supported: |
No |
Pulled Bend Label
Identifies fabricated bends when listed as separate items on the material list. The default value is FABRICATED (PULLED) BENDS.
AText ID: |
-351 |
? Value: |
None |
$ Supported: |
No |
Weight Heading
Denotes the column heading for weight. The default value is WEIGHT.
AText ID: |
-352 |
? Value: |
None |
$ Supported: |
No |
KGS Indicator
Denotes a units indicator for kilogram weights. Used as part of the Weight column heading and in the pipeline weight summary area at the bottom of the material list. The default value is KGS.
AText ID: |
-353 |
? Value: |
None |
$ Supported: |
No |
LBS Indicator
Denotes a units indicator for pound weights. Used as part of the Weight column heading and in the pipeline weight summary area at the bottom of the material list. The default value is LBS.
AText ID: |
-354 |
? Value: |
None |
$ Supported: |
No |
Total Weight Label
Denotes identification text for total pipeline weight in the Weight column and in the weight summary area at the bottom of the material list. The default value is TOTAL WEIGHT - THIS DRG.
AText ID: |
-355 |
? Value: |
None |
$ Supported: |
No |
Erection Weld Label
Identifies special type erection welds. It is used on the material list and on the isometric area as a prefix to the part number. The default value is B.
AText ID: |
-357 |
? Value: |
None |
$ Supported: |
No |
Fab Weld Label
Identifies special type fabrication welds. It is used in the material list and on the isometric area as a prefix to the part number. The default value is W.
AText ID: |
-358 |
? Value: |
None |
$ Supported: |
No |
Bolt Unit Subheading
Denotes the bolts sub-heading. Isogen outputs in DIA x LENGTH sequence.
AText ID: |
-359 |
? Value: |
None |
$ Supported: |
No |
Offshore Material Heading
Denotes the category heading under which components required for OFFSHORE erection are listed. The default value is OFFSHORE MATERIALS.
AText ID: |
-371 |
? Value: |
None |
$ Supported: |
No |
General Remarks Heading
Denotes the Remarks region heading at the bottom of the material list where remarks text is collectively listed. The default value is REMARKS.
AText ID: |
-372 |
? Value: |
None |
$ Supported: |
No |
Remark Number Heading
Denotes the Remarks column heading in the material list. Remark reference numbers are listed in this column. The default value is REM.
AText ID: |
-373 |
? Value: |
None |
$ Supported: |
No |
Welds Sub-Heading
Denotes the group sub-heading under which all welds are listed. The default value is WELDS.
AText ID: |
-375 |
? Value: |
None |
$ Supported: |
No |
Total Fab Weight Label
Denotes identification text for total fabrication weight in the Weight column and in the weight summary area at the bottom of the material list. The default value is TOTAL FABRICATION WEIGHT.
AText ID: |
-379 |
? Value: |
None |
$ Supported: |
No |
Total Erect Weight Label
Denotes identification weight for total erection weight in the Weight column and in the weight summary area at the bottom of the material list. The default value is TOTAL ERECTION WEIGHT.
AText ID: |
-380 |
? Value: |
None |
$ Supported: |
No |
Total Offshore Weight Label
Denotes identification text for total erection weight in the Weight column and in the weight summary area at the bottom of the material list. The default value is TOTAL OFFSHORE WEIGHT.
AText ID: |
-381 |
? Value: |
None |
$ Supported: |
No |
Total Unlisted Weight Label
Denotes identification text for the total weight of unlisted items in the Weight column and in the weight summary area at the bottom of the material list. The default value is TOTAL WEIGHT UNLISTED ITEMS.
AText ID: |
-382 |
? Value: |
None |
$ Supported: |
No |
Missing Weight Identifier
Denotes a missing weight indicator. The asterisk character ( * ) is a special marker used on both weight and CoG outputs to indicate that components with zero weight were encountered. The default value is *.
AText ID: |
-383 |
? Value: |
None |
$ Supported: |
No |
Additional Material - Tangent
Indicates where additional material has been added to a cut piece length to provide a minimum tangent length for a start or finish bend leg. Used in the cut list Remarks column. The default value is TANGENT +.
AText ID: |
-384 |
? Value: |
None |
$ Supported: |
No |
Additional Material - Cut/Weld
Indicates cut pieces that have additional material added between adjacent bends. Used in the cut piece remarks section. The default value is CUT/WELD.
AText ID: |
-385 |
? Value: |
None |
$ Supported: |
No |
Accumulated Pipe Indicator
Distinguishes an accumulated pipe sub-total from an individual pipe entry. The default value is TOT.
AText ID: |
-394 |
? Value: |
None |
$ Supported: |
No |
Jacket Spec Identifier
Indicates that a jacket specification identifier is set in a JACKET-SPEC type record in the pipeline input data file. Appears in the title block. The record content is appended to the AText to form a composite message. The default value is JACKET SPEC.
AText ID: |
-436 |
? Value: |
None |
$ Supported: |
No |
Shop Test Identifier
Identifies cut pieces that need an additional shop test allowance. Used on the cut list. Applies to welds with SKEY WSST or WFST. The default value is SHOP TEST.
AText ID: |
-500 |
? Value: |
None |
$ Supported: |
No |