The software uses the following attributes to configure the support:
Name |
User Name |
Category |
On Property Page |
Read Only |
---|---|---|---|---|
Gap1 |
Gap 1 |
Dimensions |
Yes |
No |
Gap1Rule |
Gap 1- Rule |
Standard |
No |
Yes |
LugRowQty |
Lug Row Quantity |
Standard |
Yes |
No |
LugRowQtyRl |
Lug Row Quantity Rule |
Standard |
No |
Yes |
OffsetAlPipe |
Offset Along Pipe |
Dimensions |
Yes |
No |
OffsetAlPipeRl |
Offset Along Pipe Rule |
Standard |
No |
Yes |
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsGap1::Gap1 |
Specifies the gap between the rows of lugs. The gap is set between the center of placement of each subsequent shear lug. Center of placement is dependent on the orientation (horizontal or vertical), rotation, and cardinal point of the shear lug. |
Example (Cardinal Point = 1, Horizontal) |
IJUAhsLugRowQty::LugRowQty |
Specifies the number of rows of lugs to include in the support. Additional rows appear above the first row of shear lugs. Center of placement is dependent on the orientation (horizontal or vertical), rotation, and cardinal point of the shear lug. |
Example (Cardinal Point = 1, Horizontal) |
IJUAhsOffAlPipe::OffsetAlPipe |
Determines the offset of lug placement along the pipe. All lugs are offset equivalently using this value. Center of placement is dependent on the orientation (horizontal or vertical), rotation, and cardinal point of the shear lug. |