Pipe Attachment 1 Attributes - Intergraph Smart Reference Data Standard Database - Version 12.3 - Help - Hexagon PPM

SDB for SRD Hangers and Supports Help 12.3

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Smart 3D Version
13
Standard Database for Smart Reference Data Version
12.3

Attribute Name

Description

Implementation Details

IJUAhsFrPipeAtt1::
PipeAtt1Part

Specifies the part number or the part class of Pipe Attachment 1 on the first selected pipe.

Pipe Attachment 1 is an optional part. To exclude a pipe attachment, do not enter any value for these attributes.

IJUAhsFrPipeAtt1Rl::

PipeAtt1Rule

Specifies a rule that returns pipe attachment part number.

IJUAhsFrPipeAtt1Ang::
PipeAtt1Angle

Specifies the angle of rotation about the route axis for Pipe Attachment 1.

Box Frame - PipeAtt1Angle

IJUAhsFrPipeAtt2::
PipeAtt2Part

Specifies the part number or the part class of Pipe Attachment 2.

Pipe Attachments are optional parts. To exclude a pipe attachment, do not type any values for these attributes.

IJUAhsFrPipeAtt2Rl::

PipeAtt2Rule

Defines an HgrSupportRule that returns a pipe attachment part number. The hanger rule must exist in the catalog; it can be the rule name, or a ProgID. To select the part number using PipeAtt2Part, do not type any value for this property.

IJUAhsFrPipeAtt2Ang::
PipeAtt2Angle

Specifies the angle of Pipe Attachment 2.

IJUAhsLugSupport::
LugSupport

Specifies the part number or the part class of a Lug support.

LugSupport is an optional part. To exclude a Lug support, do not type any value for these attributes.

IJUAhsLugSupportRl:: LugSupportRule

An HgrSupportRule that returns a Plate Part-Number. The Hanger Rule should be present in the catalog; it can be the name of a rule, or a rule ProgID.

If you intend to specify a Part-Number directly using LugSupport, then this attribute should be left blank.

IJUAhsFrLug1Off::
Lug1Offset

IJUAhsFrLug1OffRl::Lug1OffRl

Specifies the Lug offset (if applicable).

The following definitions are supported:

1 - Normal

2 - (Offset by section depth) / 2

IJUAhsFrLug1OffDef::Lug1OffDef

Defines how Lug1Offset is measured.

Pipe Attachment 2 Attributes

Pipe Attachment 2 attributes display the same behavior as Pipe Attachment 1 attributes and are connected to the first selected pipe.