A Trunnion support uses the following attributes to define the parts that are included in the support:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsTrunnionPt:: |
Specifies the part number of a hanger beam pipe that is used for the support. |
A Trunnion is a mandatory part. You must specify either a TrunnionPart or a TrunnionRule. |
IJUAhsTrunnionAng:: |
Specifies the angle of rotation for the Trunnion cross section. |
The following codelist values from the hsSteelOrientationAngle sheet in the HS_S3DAssy_Codelist workbook are supported: 0, 90, 180, 270. |
IJUAhsReflectTrun:: |
Specifies whether the Trunnion cross section must be reflected about the Y-axis of the Trunnion. |
False True |
IJUAhsCapPltPt:: |
Specifies the part number or the part class of a Plate part that the support uses. |
The Cap Plate is an optional part. Leave this attribute blank to exclude a Cap Plate. |
IJUAhsCapPltAng:: |
Specifies the angle of rotation for the cap plate about the Trunnion axis. |
|
IJUAhsPipeRPadPt:: |
Specifies the part number or the part class of a Repad part that the support uses. |
The Repad is an optional part. Leave this attribute blank to exclude a Repad. If the supported object is a straight feature then, the PipeRepad is included in the support. If the supported object is a turn feature then, the ElbowRepad is included in the support. If the supported object is an in-line feature (Tee) or end feature (Cap), then no Repad is included in the support. |
IJUAhsElbowRPadPt:: |
Specifies the part number or the part class of an Elbow Repad part that the support uses. |
|
IJUAhs_RepadTh:: RepadThickness |
Specifies the thickness of the repad part that the support uses. |
For more information on how to use part specification attributes, see Part Specifications.