The following attributes define the Leg1 and CapPlate1 attributes of a base support data driven assembly:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsLeg1:: |
The part number or the part class of the first support leg to use with the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Specify either a Leg1Part or Leg1Rule. |
IJUAhsLeg1Rl:: |
Specifies the hgrSupportRule that returns the part number for the hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsLeg1AngEx:: |
Specifies the angle of rotation for the first leg of support. The angle is about the axis of the leg. |
hsSteelOrientalAngle: |
IJUAhsLeg1Off::Leg1PartOffest |
Specifies the offset distance from pipe edge to leg1. |
|
IJUAhsLeg1OffRl::Leg1PartOffestRule |
Specifies the hgrSupportRule that returns the Leg1PartOffest. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsLeg1BeginOH:: |
Specifies the distance that the first member overhangs past the first leg. To select the overhang using Leg1BeginOverhangRule, do not enter any value for this property. |
|
IJUAhsLeg1BeginOHRl:: |
Specifies the hgrSupportRule that returns the distance. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsLeg1EndOH:: |
Specifies the distance that the first member overhangs past the first leg. To select the overhang using Leg1EndOverhangRule, do not enter any value for this property. |
|
IJUAhsLeg1EndOHRl:: |
Specifies the hgrSupportRule that returns the distance. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsCapPlate1:: |
Specifies the part number or part class of the plate part to use for the support. To select the part number using CapPlate1Rule, do not specify any value for this property. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. The Cap Plate is an optional part. If you do not require a Cap Plate, do not specify these attributes. |
IJUAhsCapPlate1Rl:: |
Specifies the hgrSupportRule that returns the plate part number. The hanger rule must be the name of an existing rule in the catalog. To select the plate part number using CapPlate1Part, do not specify any value for this property. |
|
IJUAhsCapPlate1Ang:: |
Specifies the rotation angle for the cap plate about the axis of the box frame. |