Place Part Command - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Hangers and Supports

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Help
Smart 3D Version
13.1

Adds parts and welds to a support. You can also use Place Part to re-size or replace parts within the support.

Place Part is useful when you design a support. You can first place a standard support, and then use Place Part to customize the support for your needs.

When you start placing the part, the software asks you to select a support. You can select a designed support or a standard support. This selected support is the container support for the part being placed. If you select a standard support, the software displays a dialog indicating that a designed support will be created, and the standard support will be placed inside the designed support. Click OK.

The new design support uses the same name rule as the standard support it replaces. If the name rule is user-defined, then the new design support's name is suffixed with a "*". If the standard support has a tag name rule, the same name rule will be used by the new design support.

SHARED Tip Click Tools > Options Command to turn off all SmartSketch 3D options on the SmartSketch 3D Tab (Options Dialog) except for Key point and Coordinate axis aligned. If you do not turn off all other SmartSketch options, the software may locate other objects before it finds the component ports. This can cause difficulties when the software builds the designed support.

Place Part Ribbon

Select Part Dialog

What do you want to do?