Design a support by point - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Hangers and Supports

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Help
Smart 3D Version
13.1
  1. Click Place Support by Point Command on the vertical toolbar.

  2. Select the Design box on the ribbon.

  3. Select the feature or SIO route to support.

  4. Click Accept .

  5. Select the structure to support the selected feature or the SIO route.

  6. Click Accept .

  7. Identify the location along the feature or the SIO route to place the support. You can use the Tools > Point Along Command Point Along ICON command when identifying this point.

  8. Click Finish.

  9. Click Place Part Command on the vertical toolbar.

  10. Select the support that you just placed.

  11. Select a support part from the catalog. When creating a designed support, the parts you can use are displayed in the catalog. These parts are intelligent and contain property information that enable you to generate reports for the entire support.

  12. Place the part in the model.

  13. Continue to use Place Part until you have finished designing the support.

  • While the part is on the end of your pointer, you can use Toggle Port or the T key to toggle the port attachment.

  • You can use Stretch to adjust the length of the part, if the part can be of variable length.

  • While a part is on the end of your pointer, you can rotate a part around a local axis at the active port.