Occurrence Tab (Support Component Properties Dialog) - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Hangers and Supports

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Help
Smart 3D Version
13.1

Displays the support component properties that you can edit or that are automatically determined by the software at placement. If you select more than one support component, and then select Properties , only the common properties of the selected support components display.

When viewing properties for a single support component, the following properties display. More properties may display depending on what was defined in the reference data. See the Hangers and Supports Programming Concepts.

Category

Select the properties that you want to view for the support component. Support component properties are divided into several different categories: Standard, Dimensions, Weight and CG, Fabrication and Construction, Surface Treatment and Coating, Welding, and Responsibility. You select the category for which to define values by using the Category option.

Support and part properties can appear in any category. The custom interfaces in the reference data control how the properties are grouped into categories.

Show Dimensional Legend

Click this button to view a picture of the component with dimensions labeled.

Standard

Name

Displays the unique name of the selected support component. If you type a new name, the Name Rule value changes to User Defined. Otherwise, the name is defined using the specified naming rule.

Name Rule

Defines how the support component was named. If you specified the support name, this box displays User Defined. If the software named the support, this box displays the name of the naming rule used to name the support.

Support Name

Displays the name of the parent support.

Type

Displays the type of support component. The type displayed is the part number defined in the reference data.

BOM Description

Specifies the Bill of Materials description of the part. The description includes the size, finish, and length where applicable. The default values are defined by the catalog and are read-only for standard supports. The values can be edited for designed supports.

SHARED Tip You can control the units and number of decimal places of the BOM using the HGrStructuralBOMUnits and HgrStructuralBOMDecimals rules in the HS_System.xls workbook on the HgrRules sheet. Your administrator must bulk load the workbook into the Catalog using the Add, Modify, and Delete option if you make edits to these rules.

Steel End Treatment

Specifies the treatment applied to the end of a rich hanger beam cross section. Select Cutback Steel or Snipped Steel.

  • The Cutback Steel and Snipped Steel options are available for rich hanger beams that have an L cross section.

  • If you customized the L cross section type name, the Steel End Treatment property is read-only.

  • You must add the SnipableSteel rule to the HS_System.xls workbook on the HgrRules sheet. Otherwise, the Steel End Treatment list does not display the Snipped Steel option.

  • Use a comma to separate multiple cross sections in the HS_System.xls workbook on the HgrRules sheet. For example, L, hgr_1.

Reporting Requirement

Specifies whether this object is reported.

Reporting Type

Specifies the reporting requirements code for the object. Valid codes are defined in Catalog in the Reporting Type select list.

Dimensions

Length

Specify the length of the selected component.

Weight and CG

Displays the center-of-gravity and the weight of the selected support component. The center-of-gravity locations are displayed in global system coordinates along the X-, Y-, and Z-axes.

Dry Weight

Specifies the dry weight of the object.

Wet Weight

Specifies the wet weight of the object.

For equipment, the Weight and CG property Wet Weight is the sum of Dry Weight and Water Weight. The dry weight and water weight values are catalog properties defined on the part sheet for the equipment.

Dry CG X

Specifies the X-axis location of the dry center-of-gravity.

Dry CG Y

Specifies the Y-axis location of the dry center-of-gravity.

Dry CG Z

Specifies the Z-axis location of the dry center-of-gravity.

Wet CG X

Specifies the X-axis location of the wet center-of-gravity.

Wet CG Y

Specifies the Y-axis location of the wet center-of-gravity.

Wet CG Z

Specifies the Z-axis location of the wet center-of-gravity.

Fabrication and Construction

Fabrication Requirement

Specifies the fabrication requirement for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.

Rule Driven

Specifies that a rule drives the value. This is the default option. Click to switch to User Driven .

User Driven

Allows you to select a value. Click to switch to Rule Driven .

Fabrication Type

Specifies the type of fabrication for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.

Rule Controlled

Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.

Construction Requirement

Specifies the construction requirement for the object. To change the options on the list, edit the Construction Requirement select list in Catalog.

Construction Type

Specifies the type of construction for the object. To change the options on the list, edit the Construction Type select list in Catalog.

Surface Treatment and Coating

Exterior Coating Requirement

Specifies the coating requirement for the object. To change the options on the list, edit the Coating Type select list in Catalog.

Rule Driven

Specifies that a rule drives the value. This is the default option. Click to switch to User Driven .

User Driven

Allows you to select a value. Click to switch to Rule Driven .

Exterior Coating Type

Specifies the type of coating for the object. To change the options on the list, edit the Exterior Coating Type select list in Catalog.

Rule Controlled

Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.Coating Color

Specifies the color of the object coating. To change the options on the list, edit the Coating Color select list in Catalog. Smart 3D includes this property in the painting area report.

Rule Controlled

Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.Exterior Coating Area

Specifies the area of the coating for the object.

Welding

Specifies welding symbol parameters. Weld symbols are used by the Drawings and Reports task but welding symbol parameters are only visible on the Occurrence tab.

1 - Primary Side Symbol or Primary Side Groove

13 - Secondary Side Pitch or Distance Between the Ends of Adjacent Welds

2 - Secondary Side Symbol or Secondary Side Groove

14 – Primary Side Contour

3 – Primary Side Groove Size

15 – Secondary Side Contour

4 – Secondary Side Groove Size

16 – Primary Side Finish Method

5 - Primary Side Bevel Depth or Leg Length or Actual Throat Thickness or Strength

17 – Secondary Side Finish Method

6 - Secondary Side Bevel Depth or Leg Length or Actual Throat Thickness or Strength

18 – Primary Side Root Opening or Depth of Filling

7 – Field Weld

19 - Secondary Side Root Opening or Depth of Filling

8 - All Around

20 – Primary Side Groove Angle or Included Angle of Countersink

9 – Tail Notes

21 - Secondary Side Groove Angle or Included Angle of Countersink

10 – Primary Side Length

22 – Primary Side Number Of Welds

11 – Secondary Side Length

23 - Secondary Side Number Of Welds

12 – Primary Side Pitch or Distance Between the Ends of Adjacent Welds

Primary Side Symbol

For a fillet weld, specifies the fillet weld symbol for the primary side of the weld. Select Fillet or None.

Secondary Side Symbol

For a fillet weld, specifies the fillet weld symbol for the secondary side of the weld. Select Fillet or None.

Primary Side Groove

For a groove weld, specifies the weld symbol for the primary side of the weld. Select Bevel or None.

Secondary Side Groove

For a groove weld, specifies the weld symbol for the secondary side of the weld. Select Bevel or None.

Primary Side Groove Size

For a groove weld, specifies the depth of penetration of the weld on the primary side.

Secondary Side Groove Size

For a groove weld, specifies the depth of penetration of the weld on the secondary side.

Primary Side Bevel Depth or Leg Length or Actual Throat Thickness or Strength

For a groove weld, specifies the depth of bevel from the primary side.

Secondary Side Bevel Depth or Leg Length or Actual Throat Thickness or Strength

For a groove weld, specifies the depth of bevel from the secondary side.

Primary Side 2nd Leg Length or Nominal Throat Thickness

For a fillet weld, specifies the fillet throat thickness.

Secondary Side 2nd Leg Length or Nominal Throat Thickness

For a groove weld, specifies the elementary symbol on the secondary side.

Field Weld

Specifies where a weld is performed. Select True for a site or field weld. Select False for shop weld.

All Around

Specifies whether the weld extends around the perimeter of the joint. Select True for an all-around weld. Select False for a weld that is only on the sides indicated by the weld symbol.

Primary Side Supplementary Symbol

Specifies the primary side supplementary symbol. Select None, Melt-Through, Consumable Insert, Permanent Backing, Removable Backing, or Spacer.

Secondary Side Supplementary Symbol

Specifies the secondary side supplementary symbol. Select None, Melt-Through, Consumable Insert, Permanent Backing, Removable Backing, or Spacer.

Tail Notes

Specifies the text to be added in the tail notes.

Tail Note Is A Reference

Specifies whether a tail note is applied to the reference part.

Primary Side Length

Specifies the length of the weld on the arrow side.

Secondary Side Length

Specifies the length of the weld on the other side.

Primary Side Pitch or Distance Between The Ends of Adjacent Welds

Specifies the center-to-center spacing on the arrow side.

Secondary Side Pitch or Distance Between The Ends of Adjacent Welds

Specifies the center-to-center spacing distance on the other side.

Primary Side Diameter

Specifies the diameter of the spot weld on the arrow side.

Secondary Side Diameter

Specifies the diameter of the spot weld on the other side.

Primary Side Contour

Specifies the finished contour of the face of the weld.

Secondary Side Contour

Specifies the finished contour of the face of the weld.

Primary Side Finish Method

Specifies the method to use for forming the contour of the weld.

Secondary Side Finish Method

Specifies the method to use for forming the contour of the weld.

Primary Side Root Opening or Depth of Filling

Specifies the primary side root opening.

Secondary Side Root Opening or Depth of Filling

Specifies the secondary side root opening.

Primary Side Groove Angle or Included Angle of Countersink

Specifies the total included angle of the groove between parts joined by a groove weld in the primary side.

Secondary Side Groove Angle or Included Angle of Countersink

Specifies the total included angle of the groove between parts joined by a groove weld in the secondary side.

Primary Side Number Of Welds

Specifies the number of welds on the arrow side.

Secondary Side Number Of Welds

Specifies the number of welds on the other side.

Primary Side Actual Leg Length

Specifies the leg length of a fillet weld from the primary side.

Secondary Side Actual Leg Length

Specifies the leg length of a fillet weld from the secondary side.

Responsibility

Cleaning Responsibility

Specifies the party responsible for cleaning the object. To change the options on the list, edit the Cleaning Responsibility select list in Catalog.

Design Responsibility

Specifies the party responsible for designing the object. To change the options on the list, edit the Design Responsibility select list in Catalog.

Fabrication Responsibility

Specifies the party responsible for fabricating the object. To change the options on the list, edit the Fabrication Responsibility select list in Catalog.

Installation Responsibility

Specifies the party responsible for installing the object. To change the options on the list, edit the Installation Responsibility select list in Catalog.

Painting Responsibility

Specifies the party responsible for painting the object. To change the options on the list, edit the Painting Responsibility select list in Catalog.

Requisition Responsibility

Specifies the party responsible for ordering the object. To change the options on the list, edit the Requisition Responsibility select list in Catalog.

Supply Responsibility

Specifies the party responsible for delivering the object. To change the options on the list, edit the Supply Responsibility select list in Catalog.

Testing Responsibility

Specifies the party responsible for testing on the object. To change the options on the list, edit the Testing Responsibility select list in Catalog.