Place a support at a specific location - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Hangers and Supports

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Help
Smart 3D Version
13.1
  1. Click Place Support by Point Command .

    SHARED Tip Select Design on the ribbon to design a support, one part at a time.

  2. Select one or more features or SIO routes to support.

    Place a support at a specific location STEP SELECT SUPPORTED

  3. Click Accept .

  4. Optionally, select one or more structures to support the selected features or SIO routes. You do not need to select a supporting structure when placing a support between two features or two SIO routes.

    Place a support at a specific location STEP SELECT SUPPORTING

  5. Click Accept .

  6. Do one of the following:

    1. If Rule is selected, select the support type in the Type list.

    2. If Rule is not selected, select More in the Type list, and then navigate the catalog browser to locate the appropriate support.

  7. Select the support type.

  8. Identify the location along the feature or SIO route to place the support. You can use the Tools > Point Along Command Point Along ICON command to identify this point.

    SHARED Tip You can use the SmartSketch Drawing Editor to locate the point on the edge of a slab or wall or on the centerline of a beam to use as the graphical reference for support placement.

    Place a support at a specific location STEP LOCATION

  9. Click Finish.

    Place a support at a specific location STEP FINISHED

  • When creating a design support, the parts you can use are available in the catalog. These parts are intelligent and contain property information that enables you to generate reports for the entire support.

  • The software limits the choice of feature and structured and structure SIO route connections to those available for the support type. This information is defined in the reference data.