Place a member using finish mode - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Hangers and Supports

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Help
Smart 3D Version
13.1

Show me

Place Member Finish Mode AGIF

  1. Click Place Linear Member System Command to display the Place Linear Member System Ribbon.

  2. In the Connection box, select a frame connection type. If you are unsure of which frame connection type to use, review Frame Connections. You can also select the By Rule option to allow the software to select automatically a frame connection type.

  3. Click Finish Mode to activate the Finish button.

  4. Click Connection Properties to open the Connection Properties dialog.

  5. In the Type category box, select the member type category to place.

  6. In the Type box, select the member type to place.

  7. Specify the start location, or first point, of the member. You can use the frame connection of another member as the start or end location of the member that you are placing.

  8. Specify the end location, or second point, of the member.

  9. Edit the start and end frame connection properties in the Connection Properties dialog.

  10. Click Properties to edit the member properties using the Member System Prismatic Properties Dialog.

  11. Click Finish.

  • To find the intersection of grid lines easily, click Tools > Options Command to verify that the Intersection SSK_Intersection option is selected on the SmartSketch 3D Tab (Options Dialog).

  • You can set the beta angle relative to your rotated coordinate system by using PinPoint Command and selecting the rotated coordinated system as the active coordinate system in the Coordinate System box.