Place members using discrete placement - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Hangers and Supports

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Help
Smart 3D Version
13.1

Show me

Discrete Member Placement Method AGIF

  1. Click Place Linear Member System Command to display the Place Linear Member System Ribbon.

  2. In the Connection box, select a frame connection type. If you are unsure of which frame connection type to use, review Frame Connections. You can also select the By Rule option to allow the software to automatically select a frame connection type.

  3. In the Type category box, select the member type category to place.

  4. In the Type box, select the member type to place.

  5. Specify the start location, or first point, of the member. You can use the frame connection of another member as the start or end location of the member that you are placing.

    Place Member Discrete Placement Start

  6. Specify the end location, or second point, of the member.

    Place Member Discrete Placement End

  7. Click Start to specify the start location of the next member.

  8. Specify the start location of the next member.

    Place Member Discrete Placement Start Next Member

  • To find the intersection of grid lines easily, click Tools > Options Command to verify that the Intersection SSK_Intersection option is selected on the SmartSketch 3D Tab (Options Dialog).

  • You can set the beta angle relative to your rotated coordinate system by using PinPoint Command and selecting the rotated coordinated system as the active coordinate system in the Coordinate System box.