These properties define the geometry of the rod.
For these properties, the default unit of distance is "mm". Specify "in" at the end of dimensional value to use inches.
Specifies the outside diameter of the rod.
Specifies the length of the rod as determined during placement. Length is the distance between the Port1 and Port2 end ports, excluding the end types.
Specifies the fixed length of the rod. You cannot modify this value during placement.
Specifies the weight per unit length of the rod, not including the weight due to OverLength1, OverLength2, and RepOverLen1.
Specifies the fixed portion of the rod weight that is independent of length, such as OverLength1, OverLength2, RepOverLen1, or rod ends.