Basic Eye Nut Properties - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
12 (2018)

These properties define the geometry of the eye nut.

IJUAhsRodDiameter::RodDiameter

Specifies the outside diameter of rod that attaches to the eye nut.

This value is used only in the Part Selection Rule for choosing an Eye Nut part. The rod is not included in the eye nut’s graphics.

IJUAhsThickness1::Thickness1

Specifies the thickness or outside diameter of the cylindrical stock that is used to form the eye shape.

IJUAhsElongatedEye::InnerWidth1

Specifies the inside width of the eye shape at the oval threaded base.

IJUAhsElongatedEye::InnerWidth2

Specifies the inside width of the eye shape at a position InnerLength1 along the inside of the eye.

IJUAhsElongatedEye::InnerLength1

Specifies the length at the position of InnerWidth2.

IJUAhsElongatedEye::InnerLength2

Specifies the inside length of the eye shape.

IJUAhsOverLength1::OverLength1

Specifies the amount that the rod extends past the oval threaded base.

IJUAhsPinDiameter::PinDiameter

Specifies the diameter of the pin.

The eye port is located half the PinDiameter above the bottom cylinder and represents the center of the connecting pin.

It can also be an occurrence attribute and editable on the property page. It can be used to override the default location of the eye port.