These properties define the geometry of the bolts/pins of the beam clamp.
IJUAhsPin1::Pin1Diameter
Specifies the diameter of the bolt/pin. If this is used as a bolt, then bolt diameter should be same as the pin diameter.
IJUAhsPin1::Pin1Length
Specifies the length of bolt/pin. If this is used as a bolt, then bolt length should be same as the pin length.
Pin1Length should be greater than or equal to Length1 of the bottom shape.
IJUAhsHeight3::Height3
Specifies the distance of the pin from the top port of the clip to center of the pin.