Generic Repad Properties - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.x(2018)

IJOAhsPipeOD::PipeOD

Specifies the outside diameter of the pipe.

IJOAhsElbow::ElbowRadius

Specifies the bend radius of the elbow pipe component. This setting is used by ElbowRPad.

IJOAhsElbow::FaceToCenter

Specifies the distance between the face of the elbow and the center. For a short tangent elbow, the face to center distance is the same as the elbow radius.

IJOAhsBendAngle::BendAngle

Specifies the elbow angle.

IJUAhsSize::Size

Specifies the repad part size. The part selection rules use this setting to select the correct repad part.