These properties are used to specify the different port types and their sizes for the block clamp.
Route Port
Port 1 - Route
The x-axis of the route port should be parallel to the length of the block clamp. The z-axis should be pointing in the downward direction.
Port Type |
Size |
MinSize |
MaxSize |
1016 (Pipe Clamp) |
Diameter1 |
Diameter1 |
Diameter1 |
Structure Port
Port 2 - Structure
Connects the block clamp to the structure.
Port Type |
Size |
MinSize |
MaxSize |
1011 (Steel) |
0 |
-9999 |
9999 |
Rod Port
Port 3 - Rod
Connects the block clamp to a hung nut. This port is only included if a threaded connection is used.
Port Type |
Size |
MinSize |
MaxSize |
1001 (IntThdRH) |
0 |
0 |
Thickness6 |
Weld Port
Port 4 - Weld
Specifies the location on the supporting structure where the part is welded. The port orientation is the same as the route port.
Port Type |
Size |
MinSize |
MaxSize |
1200 (Other) |
-9999 |
-9999 |
-9999 |