Vertical Plate Properties - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
12.1 (2019)

JUAhsWidth2::Width2

Specifies the width of the vertical plate.

IJUAhslength2::Length2

Specifies the length of the vertical plate.

IJUAhsThickness2::Thickness2

Specifies the thickness of the vertical plate.

IJUAhsGap1::Gap1

Specifies the gap between the two vertical plates.

IJUAhsOffset1::Offset1

Specifies the distance between the edges of the horizontal and vertical plates.

IJUAhsVerPlSecStand::VerPlSecStand

Specifies the section standard for the vertical plate.

IJUAhsVerPlSecSize::VerPlSecSize

Specifies the section size for the vertical plate.

IJUAhsVerPlSecType::VerPlSecType

Specifies the section type for the vertical plate.

IJUAhsAngle1::Angle1

Specifies the rotation angle of the first vertical section along its x-axis.

IJUAhsAngle2::Angle2

Specifies the rotation angle of the second vertical section along its x-axis.

IJUAhsConnection1::Connection1

Specifies the cardinal point of the first vertical section, which determines the connection point of the steel section. For more details, see the CrossSectionCardinalPoints codelist in the Allcodelists.xls workbook.

IJUAhsConnection2::Connection2

Specifies the cardinal point of the second vertical section, which determines the connection point of the steel section. For more details, see the CrossSectionCardinalPoints codelist in the Allcodelists.xls workbook.

IJUAhsMirrored1::Mirrored1

Specifies whether the first vertical steel section is mirrored or not. If you do not specify, the software considers the section is not mirrored.

IJUAhsMirrored2::Mirrored2

Specifies whether the second vertical steel section is mirrored or not mirrored. If you do not specify, the software considers the section is not mirrored.

IJUAhsSecConfig::SecConfig

Specifies orientation of the vertical steel section, vertical or horizontal. Enter a codelist number from hsVertHoriz sheet of the HS_S3DParts_Codelist.xls workbook.