Bolt Holes Properties - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
12.1 (2019)

For base plates with bolt holes, specify the size, quantity and positions using these properties. The graphics of the plate do not show the bolt holes, but these properties are used by assemblies.

These properties define the number of bolts and their locations in each row and the number of rows using two multiple location specifications. Multi1 is positioned along the width of the plate. Multi2 is positioned along the length of the plate. The Multi1 specification specifies the row; for the example below, Multi1Qty = 3. The Multi2 specification defines how many of these rows there are; for the example below, Multi2Qty = 2.

IJUAhsMulti1::Multi1Qty

Specifies the quantity of bolt holes along the width of the plate.

IJUAhsMulti1::Multi1LocateBy

Specifies the location of the bolts. Each bolt can be located in two ways.

1 - Relative to center of the group
2 - Relative to edge.

The exact meaning depends on the quantity of bolts. This value can be 0 (nothing), 1 (center), or 2 (Edge).

IJUAhsMulti1::Multi1Location

Specifies the location of bolt holes along the width of the plate.

IJUAhsMulti2::Multi2Qty

Specifies the quantity of bolt holes along the length of the plate.

IJUAhsMulti2::Multi2LocateBy

Specifies the location of the bolts. Each bolt can be located in two ways.

1 - Relative to center of the group
2 - Relative to edge.

The exact meaning depends on the quantity of bolts. This value can be 0 (nothing), 1 (center), or 2 (Edge).

IJUAhsMulti2::Multi2Location

Specifies the location of bolt holes along the length of the plate.

IJUAhsDiameter1::Diameter1

Specifies the bolt hole diameter.