-
Select Tools > Measure Command to display the Measure Information ribbon.
-
Select a point on the pipeline to define the first reference point.
-
Select another point on the pipeline to define the second reference point.
The software displays the calculated values on the Selection ribbon.
-
Select Cancel on the Selection ribbon to exit the Measure command.
-
In the example, only the E/W box contains a calculated value (the distance between the two points you selected on the pipeline) because both reference points are made in the E/W direction,
-
You can change the location of the second reference point by selecting a different location on the pipeline.
-
The software defines the first reference point as the primary reference point. If required, however, you can make the second reference point the primary reference point by selecting on the Selection ribbon.