The PCF attributes that are supported are listed in the table below.
PCF Attribute |
Description |
---|---|
AREA / BATCH |
Specifies a section of the plant or project. These two attributes are used interchangeably in the PCF. |
ATTRIBUTE00 to ATTRIBUTE199 |
Specifies the user-defined general-purpose pipeline attributes. These attributes can be defined and used for any purpose. |
CLIENT-DRAWING-IDENTIFIER |
Specifies the user-defined string used to identify, track, or control each individual drawing without using the usual pipeline reference or sheet number identification. Typically, this attribute is output on spool isometric drawings. |
DATE-DMY |
Specifies the date associated with the pipeline. |
EQUIPMENT-REFERENCE |
Specifies the name of the equipment. This attribute is mandatory when defining an equipment item. |
INSULATION-SPEC |
Specifies the default insulation specification. |
JACKET-SPEC |
Identifies the default piping specification for the components in the pipeline that form part of the jacket. |
MISC-SPEC1 to MISC-SPEC5 |
Indicates the user-defined specification references that hold arbitrary data. |
NOMINAL-CLASS |
Specifies the pipeline design class. |
NOMINAL-RATING |
Specifies the pressure rating of the pipeline. |
OUTPUT-FILE-NAME |
Specifies the filename of the isometric drawing output plot file. |
PAINTING-SPEC |
Identifies the default painting specification. |
PCF-FILE-NAME |
Specifies the name of the input piping component file. |
PIPING-SPEC |
Identifies the primary specification to which the pipeline belongs. |
PIPELINE-DRAWING-SEQUENCE |
Specifies the user-defined text string used to identify, track, or control each individual drawing without using the pipeline reference. |
PIPELINE-REFERENCE |
Specifies the line reference or ID of the pipeline. |
PIPELINE-TEMP |
Specifies the pipeline operating temperature. |
PIPELINE-TYPE |
Indicates the type of pipeline construction. |
PROJECT-IDENTIFIER |
Specifies the project number or name. |
REVISION |
Indicates the revision identifier for the pipeline. |
SPOOL-DRAWING-SEQUENCE |
Specifies the spool sheet isometric drawing sequence number. |
SPOOL-NAME / SPOOL-IDENTIFIER / SPOOL-ID |
Specifies the name of the spool. These three attributes are used interchangeably in the PCF. |
SPOOL-PREFIX |
Specifies the string used when creating spool identifiers. |
SYSTEM-ISOMETRIC-REFERENCE |
Specifies the name of the drawing generated from a system piping object data (POD) file. |
For more information, see Dynamic File Naming in Report Definition View.