The following -800 series ATexts are used in SPOOLGEN probing and the FFISYS.
-800 series ATexts are applicable only for SPOOLGEN 4 and earlier versions of the software. They are not used for SmartPlant Spoolgen.
-800 |
BEND |
Identification of BEND when probing. |
-801 |
ELBOW |
Identification of ELBOW when probing. |
-802 |
OLET |
Identification of OLET when probing. |
-803 |
TEE |
Identification of TEE when probing. |
-804 |
CROSS |
Identification of CROSS when probing. |
-805 |
REDUCER |
Identification of REDUCER when probing. |
-806 |
TEE REDUCER |
Identification of TEE REDUCER when probing. |
-807 |
REDUCING FLANGE |
Identification of REDUCING FLANGE when probing. |
-808 |
TEE BEND/ELBOW |
Identification of TEE BEND/ELBOW when probing. |
-809 |
ANGLE VALVE |
Identification of ANGLE VALVE when probing. |
-810 |
3 WAY VALVE |
Identification of 3 WAY VALVE when probing. |
-811 |
4 WAY VALVE |
Identification of 4 WAY VALVE when probing. |
-812 |
INSTRUMENT |
Identification of INSTRUMENT when probing. |
-813 |
MISC COMPONENT |
Identification of MISC COMPONENT when probing. |
-814 |
PIPE (TUBE) |
Identification of PIPE (TUBE) when probing. |
-815 |
FIXED PIPE |
Identification of FIXED PIPE when probing. |
-816 |
PIPE BLOCK |
Identification of PIPE BLOCK when probing. |
-817 |
FLANGE |
Identification of FLANGE when probing. |
-818 |
LJSE FLANGE |
Identification of LJSE FLANGE when probing. |
-819 |
BLIND FLANGE |
Identification of BLIND FLANGE when probing. |
-820 |
CONNECTOR |
Identification of CONNECTOR when probing. |
-821 |
BACKING NUT |
Identification of BACKING NUT when probing. |
-822 |
CLAMP |
Identification of CLAMP when probing. |
-823 |
MISC HYGENIC COMPONENT |
Identification of MISC HYGENIC COMPONENT when probing. |
-824 |
CAP |
Identification of CAP when probing. |
-825 |
COUPLING |
Identification of COUPLING when probing. |
-826 |
UNION |
Identification of UNION when probing. |
-827 |
VALVE |
Identification of VALVE when probing. |
-828 |
TRAP |
Identification of TRAP when probing. |
-829 |
VENT |
Identification of VENT when probing. |
-830 |
FILTER |
Identification of FILTER when probing. |
-831 |
SUPPORT |
Identification of SUPPORT when probing. |
-832 |
INSTRUMENT TEE |
Identification of INSTRUMENT TEE when probing. |
-833 |
WELD |
Identification of WELD when Probing. |
-834 |
NONE |
Indication that NO component was located successfully when probing. |
-835 |
(Not Used) |
Unused AText |
-836 |
(Not Used) |
Unused AText. |
-837 |
(Not Used) |
Unused AText. |
-838 |
(Not Used) |
Unused AText. |
-839 |
(Not Used) |
Unused AText. |
-840 |
Changed to Bend |
`Probing Action' message - Elbow changed to bend. |
-841 |
Flange set to Loose |
`Probing Action' message - Flange set to loose. |
-842 |
Detail Sketch ? |
`Probing Action' message - Detail Sketch added. |
-843 |
Support changed to Fabrication |
`Probing Action' message - Support changed to Fabrication. |
-844 |
Support changed to Erection |
`Probing Action' message - Support changed to Erection. |
-845 |
Support changed to Offshore |
`Probing Action' message - Support changed to Offshore. |
-846 |
Tack Weld |
`Probing Action' message - Tack Weld added. |
-847 |
Support(s) added |
`Probing Action' message - Support Welds added. |
-848 |
Automatic Weld |
`Probing Action' message - Automatic Weld added. |
-849 |
Shop Test |
`Probing Action' message - Shop Test Weld added. |
-850 |
REDUCING-CONCENTRIC |
Flange type REDUCING-CONCENTRIC selected when probing. |
-851 |
REDUCING ECCENTRIC |
Flange type REDUCING-ECCENTRIC selected when probing. |
-852 |
STUB/BACKING PAIR |
Flange type STUB/BACKING PAIR selected when probing. |
-853 |
SCREWED |
Flange type SCREWED selected when probing. |
-854 |
SLIP-ON J TYPE |
Flange type SLIP-ON J TYPE selected when probing. |
-855 |
SLIP-ON |
Flange type SLIP-ON selected when probing. |
-856 |
SOCKET-WELD |
Flange type SOCKET-WELD selected when probing. |
-857 |
WELD-NECK |
Flange type WELD-NECK selected when probing. |
-858 |
SLIP-ON ORIFICE |
Flange type SLIP-ON ORIFICE selected when probing. |
-859 |
WELD-NECK ORIFICE |
Flange type WELD-NECK ORIFICE selected when probing. |
-860 |
LAP-JOINT RING |
Flange type LAP-JOINT RING selected when probing. |
-861 |
LAP-JOINT STUB END |
Flange type LAP-JOINT STUB END selected when probing. |
-862 |
UNKNOWN |
Flange type UNKNOWN selected when probing. |
-863 |
Material added |
`Probing Action' message - Indication of additional materials added to pipeline. |
-864 |
General Information Note - ? |
`Probing Action' message - General information note added. |
-865 |
Specific Information Note - ? |
`Probing Action' message - Specific information note added. |
-866 |
Weld deleted |
`Probing Action' message - Weld deleted. |
-867 |
Support Weld(s) deleted |
`Probing Action' message - Support welds deleted. |
-868 |
Spool Name deleted |
`Probing Action' message - Spool same deleted. |
-869 |
Flow Arrow deleted |
`Probing Action' message - Flow arrow deleted. |
-870 |
Message deleted |
`Probing Action' message - Message deleted. |
-871 |
Detail Sketch deleted |
`Probing Action' message - Detail Sketch deleted. |
-872 |
Information Note deleted |
`Probing Action' message - Information Note deleted. |
-873 |
Additional Material deleted |
`Probing Action' message - Additional material deleted. |
-874 |
Loose Flange un-set |
`Probing Action' message - Loose flange un-set. |
-875 |
Location point added |
`Probing Action' message - Location point added. |
-876 |
Location point deleted |
`Probing Action' message - Location point deleted. |
-877 |
FLOOR/WALL PENETRATION |
`Probing Action' message - Identification of FLOOR/WALL PENETRATION when probing. |
-878 |
FLOW ARROW |
`Probing Action' message - Identification of FLOW ARROW when probing. |
-879 |
INSULATION SYMBOL |
`Probing Action' message - Identification of INSULATION SYMBOL when probing. |
-880 |
MESSAGE |
`Probing Action' message - Identification of MESSAGE when probing. |
-881 |
Drawing Identifier deleted |
`Probing Action' message - Identification of Drawing Identifier deleted. |
-882 |
Default Start |
`Probing Action' message - Identification of Default Start positioned. |
-883 |
Pipeline Start |
In Probing - Indication of default pipeline start point. |
-884 |
Default Bypass Closure |
In Probing - Indication of default bypass closure point. |
-886 |
Bypass Closure |
`Probing Action' message - Redefined bypass closure point. |
-887 |
Pipe Support added |
`Probing Action' message - Pipe support added. |
-888 |
Pipe Support deleted |
`Probing Action' message - Pipe support deleted. |
-889 |
Properties Changed |
`Probing Action' message - Category change for gaskets and bolts. |
-890 |
Coupling Added |
`Probing Action' message - Label showing where a coupling has been added. |
-891 |
Coupling Deleted |
`Probing Action' message - Label showing where an existing coupling has been removed. |
-892 |
Pipe Support Changed |
`Probing Action' message - Label showing where an existing pipe support has been changed. |