-
Create a drawing to use as a graphic overlay on a coupling.
You must set a specification before you can run this command.
-
Click Graphics Overlay Editor , or type COMPONENTDWGBLOCKEDIT on the command line, and then press ENTER.
The Graphics Overlay Editor dialog box displays.
-
Select a coupling type.
Click next to the size you want to assign for the graphic overlay.
-
Select Create Block.
-
Select the 3D solid, and then press ENTER.
-
Click a point for the insertion point.
-
Drag in the direction of the pipe, and then click for the direction vector.
-
Drag in the direction of the side of your graphic overlay, and then click for the side vector.
-
Select a location to save the drawing, and then type a name for the drawing.
-
Click Save.
-
Click Apply.
-
Click OK.
Next, see Display graphic overlays of coupling components in the 3D model.