Thrd/SW Valves - CADWorx - Help

CADWorx Plant

Language
English
Product
CADWorx
Subproduct
Plant
Search by Category
Help
CAESAR II Version
12
I-Configure Version
6.0(2016)
Smart Isometrics Version
8
Spoolgen Version
10
CADWorx Version
20.1 (2020 R1)
CADWorx Structure Version
2020 R1 (4.1)

Plant menu: Toolbars > Thrd/SW Valves

The Command Line column in the table below shows the command for the socket weld component and the equivalent threaded component. Use the Threaded and Socket Weld commands on the Setup Size/Spec Panel to switch between the two modes.

The commands on the Thrd/SW Valves toolbar can be used for modeling in 3D or 2D mode depending on how you define the drawing mode. For more information, see 3D Modeling versus 2D Modeling.

Command Name

Command Line

Thrd/SW Gate - Places a threaded or socket weld gate valve in the X-Y plane. For more information, see Thrd/SW Gate.

GATS/GATT

Thrd/SW Ball - Places a threaded or socket weld ball valve in the X-Y plane. For more information, see Thrd/SW Ball.

BALS/BALT

Thrd/SW Globe - Places a threaded or socket weld globe valve in the X-Y plane. For more information, see Thrd/SW Globe.

GLBS/GLBT

Thrd/SW Plug - Places a threaded or socket weld plug valve in the X-Y plane. For more information, see Thrd/SW Plug.

PLUS/PLUT

Thrd/SW Check - Places a threaded or socket weld check valve in the X-Y plane. For more information, see Thrd/SW Check.

CHKS/CHKT

Thrd/SW Needle - Places a threaded or socket weld needle valve in the X-Y plane. For more information, see Thrd/SW Needle.

NEDS/NEDT

Thrd/SW Diaphragm - Places a threaded or socket weld diaphragm valve in the X-Y plane. For more information, see Thrd/SW Diaphragm.

DIAS/DIAT

Thrd/SW Rotary - Places a threaded or socket weld rotary valve in the X-Y plane. For more information, see Thrd/SW Rotary.

ROTS/ROTT

Thrd/SW Dual Check - Places a threaded or socket weld dual check valve in the X-Y plane. For more information, see Thrd/SW Dual Check.

DCHS/DCHT

Thrd/SW Control - Places a threaded or socket weld control valve in the X-Y plane. For more information, see Thrd/SW Control.

CNTS/CNTT

Thrd/SW 3 Way Plan - Places a threaded or socket weld three-way valve in the X-Y plane. For more information, see Thrd/SW 3 Way Plan.

3VS/3VT

Thrd/SW 4 Way Plan - Places a threaded or socket weld four-way valve in the X-Y plane. For more information, see Thrd/SW 4 Way Plan.

4VS/4VT

Thrd/SW Relief Top - Places a threaded or socket weld 90 degree pressure relief valve with the relief end normal to the X-Y plane. For more information, see Thrd/SW Relief Top.

RELS/RELT

Thrd/SW Angle Top - Places a threaded or socket weld 90 degree angle valve in the X-Y plane. For more information, see Thrd/SW Angle Top.

ANGS/ANGT

Thrd/SW Gage - Places a threaded or socket weld gage valve in the X-Y plane. For more information, see Thrd/SW Gage.

GAGS/GAGT

X-Body Gate BW - Places a butt weld X-body style gate valve in the X-Y plane. For more information, see X-Body Gate BW.

EGAB

X-Body Gate Thrd - Places a threaded X-body style gate valve in the X-Y plane. For more information, see X-Body Gate Thrd.

EGAT

X-Body Gate SW - Places a socket weld X-body style gate valve in the X-Y plane. For more information, see X-Body Gate SW.

EGAS

The commands in the table below are designed for modeling in 2D.

Command Name

Command Line

Thrd/SW 3 Way Side - Places a threaded or socket weld three-way valve with the valve branch normal to the X-Y plane. For more information, see Thrd/SW 3 Way Side.

H3VS/H3VT

Thrd/SW 3 Way Vertical - Places a threaded or socket weld three-way valve with the main normal to the X-Y plane. For more information, see Thrd/SW 3 Way Vertical.

V3VS/V3VT

Thrd/SW 4 Way Side - Places a threaded or socket weld four-way valve with the valve branches normal to the X-Y plane. For more information, see Thrd/SW 4 Way Side.

H4VS/H4VT

Thrd/SW Relief Side - Places a threaded or socket weld 90 degree relief valve in the X-Y plane. For more information, see Thrd/SW Relief Side.

HRELS/HRELT

Thrd/SW Pressure Top - Places a threaded or socket weld 90 degree pressure relief valve with the pressure end normal to the X-Y plane. For more information, see Thrd/SW Pressure Top.

VRELS/VRELT

Thrd/SW Angle Side - Places a threaded or socket weld angle valve in the X-Y plane. For more information, see Thrd/SW Angle Side.

HANGS/HANGT

The arrow in the lower right corner of a command button indicates a fly-out menu with additional commands available.